Logo
Alcohol Pre Injection Swabs x 100

Alcohol Pre Injection Swabs x 100

Uniswab

Disposables
  • Class I medical device under European Medical Device Regulation (EU) 2017/745
  • Manufacturing compliant with ISO 13485 (medical device quality management system)
  • Product sterilisation compliant with ISO 11137 1:2015
  • CE marked with European authorised representative CMC Medical Devices & Drugs S.L., Málaga, Spain
  • UKCA representation via MedPath Limited, London, United Kingdom
Pre-injection swabs / Injection & Infusion

Description

Uniswab Alcohol Pre Injection Swabs x 100 (SKU A205) are single-use, individually wrapped pre-injection skin preparation swabs. Each non-woven swab is impregnated with 70% isopropyl alcohol (IPA) to provide rapid skin disinfection prior to injections, venepuncture and similar invasive procedures. Supplied in a box of 100 Class I medical device alcohol pads.

Bnefits

  • Contains 70% isopropyl alcohol for effective skin disinfection prior to injection
  • Acts as a disinfectant to clean and help remove bacteria at the intended injection site
  • Individually wrapped to maintain sterility and reduce risk of contamination
  • Impregnated non-woven swab for consistent delivery of alcohol to the skin
  • Convenient box of 100 swabs suitable for clinics, surgeries, and community settings
  • Class I medical device compliant with EU Medical Device Regulation (EU) 2017/745
  • Manufactured under ISO 13485 quality management system for medical devices
  • CE marked with designated European and UKCA representatives

Indications

  • Pre-injection skin cleansing prior to subcutaneous, intramuscular or intravenous injections
  • Skin disinfection prior to venepuncture or capillary blood sampling
  • General small-area skin antisepsis where use of 70% isopropyl alcohol is appropriate
  • Use in primary care, hospital, community, podiatry and aesthetic injection settings

Composition

  • Active: Isopropyl alcohol 70% (v/v)
  • Substrate: Non-woven fabric 50 gsm (approximately 70% polyester, 30% viscose)
  • Sachet: Paper / aluminium laminate pouch (approx. 73 g paper aluminium bag)
  • Box: Uncoated white card (approx. 350 g card, 100 g box of 100 swabs)
  • Carton: Corrugated board outer carton for 10,000 swabs

Formulation

  • Pre-soaked, single-use non-woven swab impregnated with 70% isopropyl alcohol
  • Class I sterile medical device alcohol pad for external use only

Packaging

  • Individual sachet size: approx. 50 mm x 50 mm
  • Box of 100 swabs (A205) approx. 103 mm x 55 mm x 52 mm
  • Outer carton: 10,000 swabs (100 boxes x 100) approx. 435 mm x 295 mm x 280 mm
  • GTIN (sachet): 6971028110351
  • GTIN (box of 100): 6971028110368
  • GTIN (carton of 10,000): 6971028110375

Usage

  • Use for external skin preparation only.
  • Tear open the sachet immediately before use and remove the swab.
  • Apply the swab to intact skin at the intended injection or venepuncture site.
  • Wipe the area thoroughly, typically in one direction, covering the full intended insertion area.
  • Allow the skin to air dry completely before performing the injection or procedure.
  • Single use only: discard swab and sachet safely after use.
  • Keep away from eyes, mucous membranes and open wounds.
  • Follow local infection prevention and control protocols when using pre-injection swabs.

Contraindications

  • Known hypersensitivity or allergy to isopropyl alcohol or any component of the swab.
  • Do not apply to open wounds, large areas of damaged or extensively broken skin.
  • Avoid use on mucous membranes (e.g. mouth, nose, genital areas) or in the eyes.
  • Use with caution in individuals with very sensitive or highly irritated skin.

Adverse Effects

  • Transient stinging or burning sensation at the application site.
  • Skin dryness or irritation, especially with repeated use on the same area.
  • Local redness or contact dermatitis in individuals sensitive to isopropyl alcohol.
  • Very rare risk of allergic reaction (e.g. rash, swelling); discontinue use and seek medical advice if suspected.

Storage Conditions

  • Store in a cool, dry place, away from direct heat sources, sparks and open flames.
  • Keep sachets in the original box until use to protect from moisture and contamination.
  • Store out of reach of children.
  • Dispose of used swabs and packaging according to local clinical waste policies.

Duration

Single-use application immediately prior to the injection or procedure.

Onset

Rapid antiseptic action on application; allow the area to dry fully before injection for optimal effect.

Browse more Disposables

Top Treatments

Top Cities in the UK