Logo
LHM Procedure Mask PINK x 50

LHM Procedure Mask PINK x 50

LHM

Personal Protective Equipment (PPE)
  • ASTM F2100 19 Level 3 fluid Resistant procedure mask performance
  • EN 14683:2019 + AC:2019 Type IIR medical face mask requirements
  • CE Marked medical device for use in Europe/UK
  • Manufactured under quality systems aligned with ISO 13485:2016 medical device quality management
  • Production in controlled cleanroom conditions consistent with ISO 14644 1:2015 classifications (for LHM medical mask manufacturing facilities)
Fluid resistant procedure face mask

Description

LHM Procedure Mask PINK x 50 is a box of 50 single-use, fluid-resistant procedure face masks in light pink, designed for use in clinical and healthcare environments. Manufactured by LHM Medical Technology, the masks are ASTM Level 3 and EN 14683 Type IIR compliant, providing high protection against droplets, splashes and aerosols while remaining light and comfortable for prolonged wear. Each mask is a 3-ply, earloop-style, non-woven medical mask with high bacterial and particulate filtration efficiency (BFE/PFE ≥98%) and fluid resistance up to 160 mmHg. The masks are CE-marked and marketed in the UK as MHRA-approved, making them suitable for use by healthcare professionals in settings such as clinics, dental practices, hospitals and aesthetic treatment rooms.

Bnefits

  • ASTM Level 3 and EN 14683 Type IIR fluid-resistant procedure mask providing high protection in clinical environments
  • 3-ply construction with BFE and PFE ≥98% to effectively filter bacteria and particles
  • Fluid resistance up to approximately 160 mmHg, helping protect against blood and bodily fluid splashes
  • CE-marked medical device and marketed as MHRA-approved for use in the UK healthcare sector
  • Comfortable elastic earloops designed to reduce pressure on the ears during extended wear
  • Soft, skin-friendly inner layer to enhance comfort and reduce irritation
  • Lightweight, breathable non-woven materials supporting easy respiration while maintaining protection
  • Loose-fitting but secure design suitable for routine procedures and patient contact situations
  • Supplied in a box of 50 masks, convenient for clinics and practices with moderate to high throughput
  • Available in light pink colour to coordinate with clinic branding or differentiate staff roles

Indications

  • Use as a fluid-resistant procedure mask in healthcare and clinical environments
  • Protection for healthcare workers and clinic staff during patient procedures where droplets, splashes or sprays may occur
  • Use when patients are in isolation to protect them from potential contaminants from staff or other patients
  • Appropriate for dental, medical, aesthetic and other outpatient settings requiring ASTM Level 3 / Type IIR barrier performance
  • General use in infection control protocols where a high-filtration, fluid-resistant medical mask is indicated

Composition

  • Three-layer non-woven medical mask construction
  • Outer layer: waterproof non-woven fabric designed to resist liquid penetration
  • Middle layer: melt-blown polypropylene filter treated with electret technology to enhance particle and bacterial filtration
  • Inner layer: soft, absorbent non-woven or tissue-like material designed for skin contact and moisture absorption
  • Elastic earloops for securing the mask behind the ears
  • Adjustable nose strip (mouldable metal or plastic insert) to improve facial seal over the nose bridge
  • Mask dimensions approximately 175 mm x 95 mm (adult size), as per standard LHM ASTM Level 3 masks

Formulation

  • ASTM F2100-19 Level 3 fluid-resistant procedure mask
  • EN 14683:2019 + AC:2019 Type IIR medical face mask
  • Three-layer, earloop-style mask for single use
  • Bacterial Filtration Efficiency (BFE): ≥98%
  • Particulate Filtration Efficiency (PFE): ≥98%
  • Differential pressure (ΔP): <6.0 mmH2O/cm² (breathability within Type IIR limits)
  • Fluid resistance: 160 mmHg
  • Flame spread: Class 1 (where specified for LHM Level 3 procedure masks)
  • Colour: light pink

Packaging

  • Box of 50 light pink LHM procedure masks
  • Masks supplied as flat, pleated, earloop-style masks ready for immediate use
  • Retail and clinic-ready carton with product and regulatory information on outer packaging
  • Cartons may be supplied in outer cases for bulk orders to clinics or distributors

Usage

  • Perform hand hygiene with soap and water or an alcohol-based hand rub before handling the mask.
  • Remove one mask from the box, ensuring it is intact and free from visible damage or contamination.
  • Orient the mask so that the coloured (pink) outer layer faces away from the face and the nose strip is at the top.
  • Place the mask over the nose and mouth, then position the earloops around each ear to secure the mask.
  • Mould the nose strip firmly over the bridge of the nose to minimise gaps and improve the seal.
  • Adjust the mask so it fully covers the nose, mouth and chin, ensuring it fits snugly against the sides of the face.
  • Avoid touching the front of the mask during use; if adjustment is necessary, perform hand hygiene immediately afterwards.
  • Replace the mask if it becomes damp, visibly soiled, damaged or difficult to breathe through, or in accordance with local infection control policies.
  • Remove the mask by handling only the earloops, taking care not to touch the front surface, and discard immediately in an appropriate clinical or household waste container depending on setting.
  • Perform hand hygiene immediately after mask removal and disposal.

Contraindications

  • Not suitable for individuals with known hypersensitivity or allergy to any component materials of the mask (for example specific non-woven fabrics, metals in the nose strip or elastic materials in the earloops).
  • Not intended for use on infants or very young children for whom the mask size is unsuitable or may present a suffocation risk.
  • Not designed to provide respiratory protection equivalent to a respirator (e.g. N95/FFP2/FFP3) in situations where such respirators are specifically required by local guidelines.
  • Should not be reused, washed or reprocessed; single use only.
  • Do not use if the packaging is damaged, the masks are visibly contaminated or the product is past its marked expiry date.

Adverse Effects

  • Possible skin irritation, redness or discomfort on the face or behind the ears, particularly with prolonged wear.
  • Occasional difficulty breathing or subjective breathlessness in individuals with underlying respiratory compromise when wearing any procedure mask.
  • Fogging of spectacles or eye protection if the nose strip is not adequately moulded, which may affect visibility.
  • Pressure-related discomfort at the ears or nose bridge with extended use.
  • In rare cases, allergic contact reactions to materials used in the mask, nose strip or earloops.

Storage Conditions

  • Store in a cool, dry place away from direct sunlight and excessive heat.
  • Keep in the original packaging until use to protect against dust, moisture and contamination.
  • Avoid storing near chemicals, solvents or strong odours that may affect the mask materials.
  • Protect from crushing, deformation or other physical damage to the box and contents.
  • Observe any manufacturer-stated storage temperature range and expiry date on the packaging.

Duration

Single-use device; each mask is intended to be worn for the duration of a single clinical encounter or procedure, or for a limited continuous period in line with local infection control guidance, and must then be discarded.

Onset

Immediate protective effect upon correct application and fit over the nose and mouth.

Browse more Personal Protective Equipment (PPE)

Top Treatments

Top Cities in the UK