Cleenol Impact Antibacterial Hard Surface Cleaner 750ml

Cleenol

Infection Control

Perfumed antibacterial hard surface cleaner spray (3-in-1 cleaner, sanitiser and deodoriser)

Conforms to BS EN 1276 (bactericidal activity of chemical disinfectants) when diluted to 4% (30 ml per 750 ml) and used with specified contact time.
Antibacterial cleaner tested and shown to be effective against MRSA when used neat in challenge tests.
Formulated and labelled in accordance with Regulation (EC) No 1272/2008 on classification, labelling and packaging (CLP).
Detergent composition and labelling in line with Regulation (EC) No 648/2004 on detergents.
Subject to EU Biocidal Products Regulation (EU) No 528/2012 regarding the placing on the market and use of biocidal products.

Conforms to BS EN 1276 (bactericidal activity of chemical disinfectants) when diluted to 4% (30 ml per 750 ml) and used with specified contact time.
Antibacterial cleaner tested and shown to be effective against MRSA when used neat in challenge tests.
Formulated and labelled in accordance with Regulation (EC) No 1272/2008 on classification, labelling and packaging (CLP).
Detergent composition and labelling in line with Regulation (EC) No 648/2004 on detergents.
Subject to EU Biocidal Products Regulation (EU) No 528/2012 regarding the placing on the market and use of biocidal products.

Perfumed antibacterial hard surface cleaner spray (3-in-1 cleaner, sanitiser and deodoriser)

Description

Cleenol Impact Antibacterial Hard Surface Cleaner - 750ml is a professional 3-in-1 hard surface cleaner designed to clean, sanitise and deodorise in a single operation. The ready-to-use perfumed cleaner removes a wide range of soils from most washable hard surfaces, leaving them clean, hygienic and pleasantly fragranced. It contains a light floral fragrance and is based on quaternary ammonium biocides and non-ionic surfactants, providing both cleaning power and antibacterial activity. The product is supplied in a 750ml trigger-spray bottle and is intended for professional use for general hard-surface disinfection in washrooms and other non-food-preparation areas.

Bnefits

3-in-1 action: cleans, sanitises and deodorises in a single step, saving time and labour.
Removes a wide range of soils from hard surfaces, leaving them visibly clean and hygienic.
Contains a light floral fragrance that helps to mask unpleasant odours and leaves a fresh scent.
Antibacterial formulation based on quaternary ammonium compounds to support effective disinfection.
Approved and tested against MRSA when used neat, with proven antimicrobial efficacy in challenge tests.
Conforms to BS EN 1276 when diluted to 4% (30 ml per 750 ml) with a specified contact time, demonstrating bactericidal performance.
Suitable for one-stage cleaning and disinfection of most hard, washable surfaces including floors, walls and countertops.
Clear blue liquid with moderate pH (around 7.9) that is easy to use in trigger spray applications.
Moderately biodegradable formulation in line with EU detergents legislation for environmental compliance.

Indications

Routine cleaning, sanitising and deodorising of most hard, washable surfaces in washrooms, toilets and general building areas.
One-stage cleaning and disinfection of floors, walls, tiles, washroom fixtures, worktops and other non-porous surfaces.
Situations where an antibacterial cleaner with a pleasant floral fragrance is required to control odours.
Not recommended for use in food preparation areas, where product tainting of food may occur.

Composition

QUATERNARY AMMONIUM COMPOUNDS, BENZYL (C12–C16) ALKYL DIMETHYL, CHLORIDES: 1–5% (biocidal active).
ALCOHOLS, C12–C14, ETHOXYLATED: 1–5% (non-ionic surfactant).
TURPENTINE, OIL: <1% (fragrance component).
Water and other non-classified ingredients to 100%.

Formulation

Clear blue liquid hard surface cleaner and sanitiser.
Perfumed with a light floral fragrance.
pH (concentrated solution): approximately 7.9.
Non-viscous, water-soluble solution based on quaternary ammonium compound and non-ionic surfactant system.
Antibacterial hard surface cleaner, supplied ready to use in trigger spray format.

Packaging

750 ml trigger-spray bottle for direct application to surfaces.
Typically supplied in cases of 6 x 750 ml for professional use.
SDS internal identification codes 082769 (6 x 750 ml) and 082777 (2 x 5 L) used by manufacturer.

Usage

For general hard surface cleaning and disinfection, apply the product via trigger spray directly onto the surface.
For heavy soiling, pre-clean if necessary, then spray the product evenly to wet the surface.
Allow an appropriate contact time; when diluted to 4% (30 ml per 750 ml) the product conforms to BS EN 1276, typically with a 5-minute contact time against specified organisms.
For MRSA control, use the product neat as indicated in manufacturer antimicrobial test data.
After the required contact time, wipe the surface clean with a cloth or mop; rinsing is advisable on surfaces that may be in prolonged contact with skin.
Do not use on food preparation surfaces or areas where food may be tainted by residual fragrance.
For professional users only; always follow local cleaning and disinfection protocols and refer to the product label and Safety Data Sheet for full directions.

Contraindications

Not to be used in food preparation areas or on food-contact surfaces where tainting of food may occur.
Avoid use on surfaces that are not compatible with water-based detergents or quaternary ammonium compounds.
Do not mix with other cleaning agents or chemicals, particularly other disinfectants or strong oxidising agents.
Not intended for application to skin or for use as a hand or body cleanser.

Adverse Effects

Causes skin irritation on prolonged or repeated contact; appropriate gloves should be worn.
Causes serious eye damage; eye protection is recommended where splashing may occur.
Very toxic to aquatic life and toxic to aquatic life with long lasting effects; avoid release to the environment.
Ingestion may be harmful and can cause irritation or damage to the gastrointestinal tract.
Inhalation of spray mists may cause respiratory irritation in poorly ventilated areas.

Storage Conditions

Store in the original, tightly closed container.
Store at temperatures between 0°C and 40°C in a cool, dry place.
Keep away from direct sunlight, extreme heat and freezing conditions.
Store out of reach of children and unauthorised persons.
Avoid release to the environment and store away from foodstuffs and animal feed.

Duration

Used as needed for routine and periodic cleaning and disinfection of hard surfaces; contact time for disinfection is generally around 5 minutes, depending on use pattern and local protocols.

Onset

Begins to act immediately on application, with full bactericidal performance demonstrated after the specified contact time (for example, 5 minutes under BS EN 1276 test conditions).