500ml Empty Bottle with Pump

Generic

Infection control supplies

Refillable dispenser bottle

Description

A 500ml empty plastic bottle supplied with a pump dispenser, designed for decanting and dispensing liquids such as hand wash, sanitiser, lotions or disinfectant solutions in clinical, infection-control or general environments. The bottle is supplied unfilled and includes a dip-tube that can be cut to length so the pump sits correctly within the bottle, ensuring efficient product delivery and minimal waste.

Bnefits

500ml capacity suitable for frequent-use liquids such as hand sanitiser, soap or surface disinfectant.
Supplied empty, allowing the user to fill with their preferred product and concentration.
Pump dispenser enables controlled, hygienic dosing and reduces product wastage.
Cut-to-size pump tube allows customisation to ensure optimal fit and complete product draw-up.
Reusable and refillable, supporting cost-efficiency and waste reduction compared with single-use packaging.
Clear or translucent plastic allows visual monitoring of remaining volume so bottles can be refilled in good time.
Suitable for use in healthcare, clinics, workplaces, salons or domestic settings as part of infection control routines.

Indications

Dispensing alcohol hand rub, hand wash, sanitiser or soap at point of use.
Holding ready-to-use disinfectant or detergent solutions for surface cleaning.
Storing and dosing lotions or gels in clinical, salon or domestic settings.
Use in infection control stations, treatment rooms, reception desks or washrooms.
Situations where a refillable pump dispenser is preferred over disposable packaging.

Composition

Empty plastic bottle with approximately 500ml capacity (commonly HDPE or PET type plastic).
Screw-on pump head with dip-tube extending to the base of the bottle (tube can be cut to size).

Formulation

Non-sterile, reusable plastic container with mechanical pump mechanism.
No chemical formulation supplied; bottle is provided empty for user-filled liquids.

Packaging

Single 500ml empty plastic bottle supplied with matching pump dispenser.
Bottle and pump typically supplied loose or in a simple protective outer (e.g. bag or box) suitable for storage in stockrooms.
Clear labelling on trade packaging indicating capacity and pump inclusion; sold as a clearance item in the Infection Control category.

Usage

Before first use, ensure the bottle and pump are visibly clean and, if required by local protocol, disinfected or washed and dried.
Fill the bottle with the required liquid (e.g. hand sanitiser, soap, disinfectant) without exceeding the 500ml maximum capacity.
Measure the dip-tube against the inside height of the bottle and cut the tube to length so it reaches near the bottom without bending or kinking.
Attach and screw the pump firmly onto the bottle to create a secure seal.
Prime the pump by pressing several times until liquid is dispensed smoothly.
Label the bottle clearly with the contents, concentration, date of preparation and any hazard information according to local policy.
Clean the external surfaces of the bottle and pump regularly as part of infection control procedures.
When changing product type, empty and thoroughly clean/rinse the bottle and pump according to local infection control guidance before refilling.
Dispose of bottles and pumps that become damaged, heavily stained, or difficult to decontaminate.

Contraindications

Not suitable for storage of highly corrosive, oxidising or solvent-based chemicals that may degrade the plastic or pump components.
Avoid use with sterile or parenteral solutions where a validated sterile, single-use container is required.
Do not use if the bottle or pump is cracked, deformed, leaking or unable to be adequately cleaned.
Not food-grade unless explicitly stated by the manufacturer; avoid using for consumable food or beverage storage in clinical settings.

Adverse Effects

Potential leakage or spillage if the pump is not properly secured or if the bottle is damaged.
Risk of microbial contamination of contents if cleaning and refilling protocols are not followed.
Possible reduced pump function or blockage if used with highly viscous products beyond the pump’s design capability.
Allergic or irritant reactions may occur from the dispensed product if users are sensitive to the liquid being stored (related to contents, not the empty bottle itself).

Storage Conditions

Store empty bottles in a clean, dry area away from direct sunlight and excessive heat to prevent warping or degradation.
When filled, keep bottles tightly closed when not in use and store according to the requirements of the filled product (e.g. flammability, temperature).
Avoid storing heavy objects on top of the bottle to prevent deformation of the pump or container.
Keep out of reach of small children when filled with potentially hazardous liquids.