Hyaluronic acid injectable moisturiser for face, neck and hands
Certifications
Described in official training materials as CE Marked for safety and quality as a hyaluronic acid skin booster.
Manufactured by BNC Korea, a medical aesthetics manufacturer, for LUMI PRO / LUMIFIL in accordance with relevant quality and regulatory standards for injectable HA devices.
Practitioners should verify current CE / UKCA marking, device classification and any national registrations by checking the physical pack labelling and applicable regulatory databases before use or advertising.
Described in official training materials as CE Marked for safety and quality as a hyaluronic acid skin booster.
Manufactured by BNC Korea, a medical aesthetics manufacturer, for LUMI PRO / LUMIFIL in accordance with relevant quality and regulatory standards for injectable HA devices.
Practitioners should verify current CE / UKCA marking, device classification and any national registrations by checking the physical pack labelling and applicable regulatory databases before use or advertising.
Hyaluronic acid injectable moisturiser for face, neck and hands
Description
Lumi Pro Skin Booster HA 40mg (3x2ml) is a state-of-the-art injectable “moisturiser” formulated as a high-strength, non-cross-linked hyaluronic acid (HA) skin booster. Each 2ml pre-filled syringe contains a market-leading 40mg of HA (120mg total per triple pack) designed by UK Skin-Tech Innovation and manufactured by BNC Korea for the LUMI-PRO brand. The product is intended for professional aesthetic use on the face, neck and hands to deliver deep, long-lasting hydration into the deeper layers of the skin, stimulate collagen production, improve elasticity and skin tone, and create a smooth, luminous complexion. Clinical marketing materials highlight 33% higher HA content than the industry’s leading brand, instant hydration with visible results in as little as 48 hours, and results that can last up to 6–12 months when used in a full treatment protocol.
Bnefits
Delivers intense, deep hydration to the skin with a market-leading 40mg of HA per 2ml syringe
33% higher hyaluronic acid content than the industry’s leading comparable skin booster brand
Non-cross-linked hyaluronic acid formulation designed to spread smoothly and evenly in the tissue
Instant hydration with visible improvement in radiance, plumpness and softness typically within 48 hours
Stimulates collagen production to improve firmness, elasticity and overall skin quality
Helps reduce the appearance of fine lines and improves skin texture and tone
Provides a luminous, “glow-from-within” effect and restores a youthful, hydrated appearance
Clinically trialled formulation, CE-marked for safety and quality according to training-material statements
Highly versatile skin booster suitable for face, neck and hands, offering total hydration in a syringe
Can be used as a stand-alone bioremodelling treatment or alongside other aesthetic procedures (e.g. fillers, microneedling) within appropriate protocols
Indications
Dehydrated or dull skin on the face, neck and hands requiring deep, long-lasting hydration
Fine lines and early signs of ageing where improved elasticity and firmness are desired
Loss of skin radiance and skin-quality concerns such as rough texture or uneven tone
Patients seeking non-surgical skin rejuvenation and bioremodelling with minimal downtime
Adjunctive skin-quality optimisation before or after other aesthetic procedures, as determined by a trained practitioner
Composition
Active ingredient: Non-cross-linked hyaluronic acid (sodium hyaluronate) 40mg per 2ml syringe (20.93mg/ml)
Total HA content per triple pack: 120mg HA (3 × 40mg in 3 × 2ml syringes)
Sterile, pyrogen-free injectable solution for intradermal use
Full excipient list is not publicly detailed; refer to official package leaflet and instructions for use (IFU) for complete composition
Formulation
Non-cross-linked hyaluronic acid skin booster for professional injectable use
Sterile, ready-to-use solution in 2ml pre-filled syringes
Designed for intradermal injection using appropriate skin-booster techniques (e.g. BAP points or micro-bolus techniques) by trained practitioners
Optimised rheology for smooth application and even diffusion in facial, neck and hand tissues
Packaging
Triple pack containing 3 × 2ml pre-filled sterile syringes of Lumi Pro Skin Booster HA 40mg
Each syringe contains 40mg of non-cross-linked hyaluronic acid in 2ml
Supplied in premium clinic-ready packaging under the LUMI-PRO brand
Intended for single-patient use per syringe and professional clinic distribution
Usage
For professional use only by suitably trained healthcare or aesthetic practitioners experienced in injectable skin boosters.
Indicated treatment areas include the face, neck and hands; the practitioner should select injection points appropriate to the patient’s anatomy and concerns.
Typical recommended protocol from distributor and training materials: an initial course of 2–3 treatment sessions spaced approximately 3–4 weeks apart.
Maintenance treatments are often advised every 6–12 months, or more frequently (e.g. every 1–2 months) according to patient needs and practitioner judgement.
Injection techniques commonly recommended include the BAP (Bio Aesthetic Points) technique or micro-bolus / linear threading in the mid to deep dermis, using small aliquots to ensure even product distribution.
Prior to treatment, cleanse and disinfect the treatment area thoroughly, and apply topical anaesthetic if required, following clinic policy.
Inject slowly, monitoring patient comfort and tissue response; avoid intravascular injection and adhere strictly to safe injection practices.
Gently massage the treated areas after injection if recommended by the protocol to aid even distribution of the product.
Post-treatment, advise the patient to avoid makeup, saunas, sunbeds, alcohol and strenuous exercise for at least 24 hours or as per clinic protocol; provide written aftercare instructions.
Always follow the most current official LUMI-PRO / distributor protocol and the product’s IFU for exact technique, depths, contraindications and precautions.
Contraindications
Specific contraindications for Lumi Pro Skin Booster are not fully listed in publicly available marketing materials.
Standard contraindications for injectable hyaluronic acid skin boosters and similar aesthetic procedures apply, including (but not limited to):
• Known hypersensitivity or allergy to hyaluronic acid or any component of the formulation
• Active skin infection, inflammation or disease at or near the intended injection site
• Systemic infection or severe acute illness
• History of severe anaphylactic reactions or multiple severe allergies
• Autoimmune diseases or immunosuppression where injectable treatments are inadvisable, unless assessed and approved by a suitably qualified clinician
• Pregnancy or breastfeeding, as these groups are generally excluded from elective aesthetic injectables in the absence of safety data
• Any other contraindications specified in the official IFU or applicable clinical guidelines.
Practitioners must conduct a full medical history, assessment and informed consent process, and always refer to the official product information for up-to-date contraindications.
Adverse Effects
No full adverse-event profile specific to Lumi Pro Skin Booster is published in open marketing materials, but expected side effects are in line with other injectable HA skin boosters.
Common, usually transient effects may include: redness, swelling, tenderness, bruising, itching or mild discomfort at injection sites.
Less common but more serious risks, comparable to other injectable HA products, can include: infection, prolonged inflammation, nodules or lumps, hypersensitivity reactions, and vascular compromise (e.g. occlusion or embolisation) if product is inadvertently injected intravascularly.
All injectors must be trained to recognise and manage complications (including protocols for vascular occlusion) and provide appropriate aftercare and follow-up.
Patients should be advised to contact the clinic immediately if they experience severe pain, blanching, unusual discolouration, visual changes, signs of infection or any other unexpected symptoms.
Refer to the official IFU and training materials for detailed safety information, complication management and reporting requirements.
Storage Conditions
Specific temperature and storage details are not clearly stated in public marketing pages; always follow the storage instructions printed on the outer carton and package leaflet.
In line with typical requirements for sterile HA-based injectables, the product should be stored in its original packaging, protected from light and extreme temperatures, and not frozen.
Keep out of reach of children and store in a secure area accessible only to authorised clinic personnel.
Do not use if the packaging is damaged, the solution appears discoloured or contains particulates, or if the product is past its expiry date.
Duration
Distributor and training materials commonly recommend a course of 2\u20133 treatments spaced about 3\u20134 weeks apart, with results typically lasting approximately 6 to 12 months depending on individual factors; maintenance sessions may then be performed periodically (e.g. every 6\u201312 months or as clinically indicated).
Onset
Marketing and training sources report instant hydration with an initial visible improvement in skin hydration and glow shortly after treatment, and more noticeable results developing within approximately 48 hours and continuing to improve over subsequent weeks as collagen stimulation and tissue remodelling occur.
