Description
mikrozid® alcohol jumbo wipes x 220 wipes are ready-to-use, alcohol-based disinfectant wipes from Schülke’s mikrozid range, designed for rapid cleaning and disinfection of non-invasive medical devices and hard, wipeable surfaces. They use a unique blend of two alcohols with added surfactants to deliver high-level virucidal performance within one minute contact time, while also providing effective bactericidal (including Mycobacterium tuberculosis), yeasticidal and virucidal activity. The jumbo wipes are large (approx. 20 x 27 cm), quick-drying and residue-free, making them suitable for near-patient areas and other high-risk clinical environments. This specific pack configuration contains 220 jumbo wipes in a convenient dispensing tub supplied for infection control use in healthcare, dental, and other professional settings.
Bnefits
- Blend of two alcohols for very high performance against viruses within one minute contact time (EN 14476).
- Provides both cleaning and disinfection in a single product thanks to added surfactants that boost cleaning performance.
- Broad spectrum of activity: effective against bacteria (including TB), yeast and viruses including enveloped viruses.
- Rapid action with 1 minute contact time for bactericidal, yeasticidal and tuberculocidal efficacy (EN 16615 4-field test) and virucidal activity against key test viruses.
- Quick-drying and residue-free finish helps avoid streaking and build-up on treated surfaces.
- Ready-to-use impregnated wipes in a convenient tub format – no additional preparation or dilution required.
- Jumbo wipe format (approximately 20 x 27 cm) offers wide surface coverage per wipe, improving efficiency for larger surfaces.
- Suitable for rapid disinfection of non-invasive medical devices and near-patient surfaces in areas with increased risk of infection.
- Supplied in a controlled dispenser tub that helps prevent drying out of wipes and facilitates easy single-wipe dispensing.
- Recognised schülke product line, supported by detailed product information sheets, safety data sheets and microbiological efficacy data.
Indications
- Rapid cleaning and disinfection of non-invasive medical devices and hard, wipeable surfaces in healthcare and clinical settings.
- Disinfection of near-patient surfaces and equipment in areas with increased risk of infection and where short contact times are required.
- Typical application areas include patient treatment units and nearby work surfaces, examination couches, operating tables and surrounding work surfaces, and surfaces of medical equipment.
- Use in hospitals, dental practices, GP surgeries, outpatient clinics, aesthetic medicine and dermatology clinics, and other professional healthcare environments where high-level surface hygiene is required.
Composition
- Ready-to-use non-sterile surface disinfectant wipes impregnated with alcoholic solution.
- 100 g of impregnating solution contains approximately:
- 0.25 g ethanol (94 %)
- 0.35 g 1-propanol
- Non-ionic surfactants and excipients (for enhanced cleaning performance and wetting properties).
Packaging
- Plastic dispensing tub containing 220 ready-to-use mikrozid® alcohol jumbo wipes.
- Resealable lid to reduce evaporation and maintain wipe moisture during in-use shelf life.
- Outer labelling includes product name, batch number, expiry date, composition summary, safety and hazard information, instructions for use, and manufacturer details.
- Tubs are typically supplied individually and in outer cartons for bulk supply to healthcare facilities.
Usage
- Ensure all visible soiling is removed from surfaces before disinfection (pre-clean if necessary).
- Open the tub and remove one impregnated wipe, then immediately reseal or close the lid to minimise drying.
- Thoroughly wipe the surface or non-invasive medical device, ensuring complete wetting of all areas to be disinfected.
- Observe the recommended contact time: generally 1 minute for bactericidal (including TB), yeasticidal and virucidal activity (per EN 16615 and EN 14476).
- If required, use multiple wipes for larger surface areas to maintain adequate wetting and contact time.
- Allow the surface to air-dry; do not wipe dry to ensure full disinfectant efficacy and a residue-free finish.
- Do not use on surfaces sensitive to alcohol (e.g. acrylic glass, certain plastics, leather, some PVC surfaces).
- For refilling compatible dispensers, disinfect hands and wear new protective gloves, avoid contamination of the tub and lid, and follow manufacturer refilling guidance.
- Use biocides safely – always read the label and product information, and consult the Safety Data Sheet for detailed safety and handling instructions.
- Dispose of used wipes as clinical or domestic waste according to local regulations; do not flush wipes down toilets.
Contraindications
- Do not use on alcohol-sensitive surfaces such as acrylic glass and certain plastics, leather, or PVC where alcohol damage (e.g. crazing, clouding or softening) may occur.
- Not intended for final disinfection of semi-critical or critical medical devices that require sterilisation or high-level disinfection by validated methods.
- Not suitable for direct application to skin, wounds, mucous membranes or invasive medical devices.
- Use with caution in poorly ventilated areas due to alcohol vapours; avoid inhaling vapour or aerosol.
- Individuals with known hypersensitivity or allergy to ethanol, 1-propanol, or other formulation components should avoid direct contact with the solution.
- Keep away from ignition sources – the product is flammable due to its alcohol content.
Adverse Effects
- Prolonged or repeated skin contact with the impregnating solution may cause dryness, irritation or dermatitis, especially in sensitive individuals.
- Inadvertent eye contact with the solution can cause irritation, redness and watering; rinse cautiously with water if contact occurs and seek medical advice if symptoms persist.
- Inhalation of high concentrations of alcohol vapours may cause transient irritation of the respiratory tract, dizziness or headache in susceptible individuals; ensure good ventilation.
- Misuse on incompatible or alcohol-sensitive surfaces may lead to cosmetic or structural damage such as discolouration, softening or crazing of plastics.
Storage Conditions
- Keep the container tightly closed when not in use to prevent evaporation and contamination.
- Store at room temperature in the original container, protected from frost, excessive heat and direct sunlight.
- Keep away from open flames, sparks and other sources of ignition due to the flammable alcohol content.
- Store out of the reach of children and unauthorised persons.
- Do not store in a very hot environment or in direct sunlight for prolonged periods, as this can accelerate evaporation and reduce product performance.
- Only recycle or dispose of completely emptied packaging; dispose of partially used product and used wipes according to local regulations.
Duration
Not applicable \u2013 this is a surface disinfection product used as needed for routine or episodic cleaning and disinfection; no defined treatment course.
Onset
Disinfectant activity is rapid, with effective bactericidal, yeasticidal, tuberculocidal and virucidal action typically achieved within 1 minute contact time when surfaces are thoroughly wetted and the product is used according to the manufacturer\u2019s instructions.
