Provita 35 Watt Examination Lamp with Flexible Gooseneck Arm

Description

The Provita 35 Watt Examination Lamp with Flexible Gooseneck Arm – LED is a Series 1 examination light from provita medical, designed to deliver brilliant, non-reflective illumination of the treatment field while meeting and surpassing relevant medical safety regulations. It features a hygienically covered flexible gooseneck for precise positioning, a double-housing cool lamp head with strong metal handle, and a central-reflector LED light source (3 x 1 W, 18 V / 12 W) providing >50,000 lux at 500 mm with excellent colour rendering (Ra ~93, R9 ~90). With a working radius of approximately 800 mm, high light output, long LED life expectancy (>30,000 h) and low maintenance requirements, the lamp is suitable for a wide range of clinical examination environments. Multiple mounting options (wall, rail and mobile stand) make it universally adaptable to different treatment rooms.

Bnefits

Brilliant, non-reflective illumination of the treatment field to support accurate clinical examination and diagnosis.
High light output (>50,000 lux at 500 mm, ~12,750 lux at 1,000 mm) with focused light field (D10 ~100 / 160 mm at 500 / 1,000 mm).
Excellent colour rendering (Ra ~93, R9 ~90) for natural tissue colour reproduction.
Energy-efficient LED technology (3 x 1 W, 18 V / 12 W) with long life expectancy (>30,000 hours) and minimal maintenance.
Flexible, hygienically covered gooseneck arm for precise, stable positioning with a working radius of approximately 800 mm.
Cool double-housing lamp head and strong, stable metal handle for safe and ergonomic adjustment during use.
Universally adaptable design with selectable fittings (wall mount, rail mount, fixed-height mobile stand) for different room layouts.
All plastic parts are light-resistant and the lamp is designed for complete recyclability at end of life.

Indications

General medical and surgical examination lighting in clinics, hospitals and outpatient practices.
Use in GP, internal medicine, gynaecology, dermatology and ENT examination rooms.
Minor procedures and treatment rooms where a focused, high-quality examination light is required.
Supportive illumination in diagnostic, wound-care and treatment settings where accurate colour rendering is essential.

Composition

Lamp head with central-reflector LED module (3 x 1 W LED, 18 V / 12 W).
Double-housing design to keep the lamp head cool in operation.
Flexible gooseneck arm with hygienic covering.
Strong metal handle on lamp head for ergonomic positioning.
Powder-coated metal components with high stability against discolouration.
Protected internal cable routing for improved safety and hygiene.
Joint pin Ø 18 mm, length 35 mm for mounting to stands, rails or wall brackets.

Packaging

Lamp assembly with flexible gooseneck arm and lamp head (approx. 2.6 kg total weight, lamp only).
Integrated joint pin Ø 18 mm, length 35 mm for attachment to compatible stands, rails or wall mounts.
Supplied with mains power supply suitable for 100–240 V, 50–60 Hz (mount-specific accessories such as stands or wall brackets may be ordered separately, depending on configuration).

Usage

Install the lamp using the appropriate fitting (wall mount, rail mount or fixed-height mobile stand) according to the manufacturer’s instructions and local electrical regulations.
Ensure the joint pin (Ø 18 mm, L 35 mm) is securely fixed in the chosen mounting accessory before use.
Connect to the mains supply (100–240 V, 50–60 Hz) using the supplied power unit; only operate on properly grounded outlets.
Switch the lamp on using the switch located at the lamp head; optional 2-step switch/dimmer variants provide additional light-level control where fitted.
Adjust the flexible gooseneck arm and lamp head using the metal handle to position the light field over the treatment area; maintain the recommended working distance (typically 500–1,000 mm) for optimal illuminance.
Avoid staring directly into the light source and do not direct the beam into patients’ eyes for longer than necessary.
Clean and disinfect external surfaces, including the gooseneck and lamp head, using compatible hospital-grade wipes or solutions as specified in the manufacturer’s cleaning instructions; do not allow fluids to enter the lamp head or electrical components.
Perform periodic inspection of the cable, joints and mounting points; if damage, looseness or malfunction is observed, remove the lamp from service and have it checked by qualified service personnel.
Do not open the lamp head or attempt to service internal electrical components; servicing should only be carried out by authorised technicians.

Contraindications

Do not use in explosive atmospheres or in the presence of flammable anaesthetic mixtures or gases unless explicitly approved by the manufacturer and local regulations.
Not intended for use as a surgical operating light where specific surgical-grade lighting standards are mandated, unless the configuration fulfils applicable standards.
Do not use if the lamp, cable, plug, gooseneck or mounting hardware is visibly damaged or unstable.
Use only with approved mounts and accessories compatible with the joint pin Ø 18 mm, L 35 mm to avoid tipping or mechanical failure.

Adverse Effects

Temporary visual discomfort or glare if the beam is directed into the eyes of patients or staff at close range.
Potential risk of burns or thermal discomfort if non-LED variants or incorrect bulbs are used contrary to specifications (this LED model is designed to operate with low surface temperature).
Electrical shock or fire hazard if used with damaged cables, incorrect voltage supply or in environments not compliant with the device’s electrical safety classification.

Storage Conditions

Store in a clean, dry indoor environment when not installed or in service.
Protect from moisture, condensation and corrosive atmospheres.
Avoid mechanical stress, impacts or bending of the gooseneck when transporting or storing the lamp.
If shipped or stored before installation, keep in original packaging to protect from dust and damage.
Operate and store only within the ambient temperature and humidity ranges specified in the manufacturer’s documentation.