The 3 in 1 Diamond Microdermabrasion Machine from Two Face Aesthetics is a professional-style cosmetic skincare device for home or salon use. Using sterile diamond heads and adjustable vacuum suction, it gently abrades the top layer of the skin to remove dirt, debris, blemishes, wrinkles and unwanted pigmentation, while helping the skin to replenish natural nutrients, restore cell activity and promote overall skin health. The system includes multiple diamond pens and heads, filters and accessories, all controlled by a single vacuum intensity regulator for comfortable, tailored treatments.
Bnefits
Non-surgical exfoliation of the top skin layer using sterile diamond heads.
Non-surgical skin resurfacing using sterile diamond heads combined with adjustable vacuum suction.
Designed for topical, external use on intact skin only.
Packaging
Retail box containing the diamond dermabrasion machine.
Accessories included in the package: PVC vacuum hose (8×5) ×1, diamond pens ×3, diamond heads ×9, heads box with foam ×1, O-rings ×3, cotton filter packs ×2, power cord ×1, fuses ×3, user manual ×1.
Usage
Ensure the device is placed on a stable, dry surface and all components are available.
Push in the movable ring of the copper nozzle at the handpiece and pull out the 8×5 size vacuum hose.
Slide the black plastic ring onto the vacuum hose.
Apply a drop of cream or milk lotion on the vacuum hose nozzle if instructed, push in the movable ring and insert the vacuum hose fully into the nozzle.
Insert a cotton swab (cotton filter) into the selected diamond head, then tighten the diamond head onto the handpiece. Remove and replace the cotton swab after every treatment.
Connect the other end of the vacuum hose to the main unit as directed in the manual.
Turn on the power switch on the machine.
Adjust the vacuum intensity gradually using the vacuum regulator, following the reference table in the manual and checking for comfort. Do not start at maximum intensity.
Use the inclined area of the handpiece to contact the skin surface and proceed with a slow, continuous sliding motion.
Do not leave the handpiece in one spot for too long to avoid skin damage.
Gently stretch the skin with your thumb and finger and glide the handpiece 2–3 times over the area being treated, then cross again in different directions to avoid streaking lines. Brush-stroke or polishing motions may be used in different areas if appropriate.
If crystal/flow adjustment is available on your model, adjust the flow rate slowly from minimum upward as needed, avoiding maximum unless absolutely necessary for comfort.
After treatment, brush off remaining dead skin with a soft brush and rinse the area with damp sponges or a cool damp towel.
Allow the skin to dry fully, then apply the desired skincare products as recommended.
To clean the diamond heads, use a toothbrush or cotton swab dampened with a small amount of alcohol to remove impurities. After cleaning, use UV light or high temperature sterilisation as appropriate.
Switch off the device and disconnect from the mains after use.
