Alcohol Surface Wipes (70% IPA) – Pack of 70
Medisanitize
Disinfectant & Infection Control SuppliesIsopropyl alcohol (IPA) surface disinfectant wipes (70% IPA)
Certifications
- Tested to European disinfection efficacy standards EN1276 and EN13727 as declared by the supplier.
- Manufactured / packaged in the UK, as stated on the product listing.
- Tested to European disinfection efficacy standards EN1276 and EN13727 as declared by the supplier.
- Manufactured / packaged in the UK, as stated on the product listing.
Isopropyl alcohol (IPA) surface disinfectant wipes (70% IPA)
Description
A pack of 70 isopropyl-alcohol (IPA) saturated surface wipes pre-moistened with 70% IPA solution designed for rapid disinfection of hard surfaces in clinical, aesthetic, and general environments. Each wipe measures 180 mm × 170 mm. The product listing states that it conforms to European standards EN1276 and EN13727 and claims to kill 99.9% of bacteria including MRSA, Listeria, Salmonella and E. coli. The wipes are presented in a flow-wrap pack lined with an aluminium inner and a resealable plastic cap to maintain moisture and prolong shelf-wetness. They are described as thick, extra-strong fabric for deep cleaning and are marketed as a fast-acting formula requiring no water. Pack is made in the UK.
Bnefits
- Pre-saturated with 70% isopropyl alcohol for ready-to-use surface disinfection without additional preparation.
- Effective against a broad range of bacteria including MRSA, Listeria, Salmonella, E. coli — claimed kill rate 99.9%.
- Complies with recognized European disinfection standards EN1276 and EN13727 for bactericidal efficacy.
- Convenient flow-wrap packaging with resealable cap to preserve wetness and facilitate repeated use over time.
- Wipe size (180 mm × 170 mm) and thick fabric design allow for effective coverage of larger surface areas.
- Fast-acting disinfectant that dries quickly and does not require additional water or rinsing.
Indications
- Surface disinfection in clinical, aesthetic, medical or salon environments before or after procedures.
- Disinfection of hard, non-porous surfaces, instruments and workspaces to reduce risk of cross-contamination.
- General hygiene and infection control in outpatient, community, or home care settings.
- Suitable for sanitising surfaces in between patient treatments or aesthetic procedures.
Composition
- Active ingredient: 70% v/v Isopropyl Alcohol (IPA)
- Solvent: remainder water or deionised water (typical for IPA wipes) — derivation from comparable technical data sheets.
- Substrate: non-woven wipe fabric (pre-saturated with IPA solution)
- No additional biocidal additives (e.g. quaternary ammonium compounds) mentioned — described as PHMB-free and QUAT-free by comparable 70% IPA wipe products.
Formulation
- Pre-saturated isopropyl-alcohol wipe (wet wipe) — ready to use without dilution or additional preparation
- Single-use wipe (not meant for reuse across multiple surfaces or patients)
- Flow-wrap packaging containing multiple wipes (pack of 70) with resealable cap to retain moisture between uses
Packaging
- Flow-wrap pack containing 70 wipes, lined with aluminium inner layer to reduce alcohol evaporation and equipped with a resealable plastic cap to maintain wetness.
- Each wipe dimension: 180 mm × 170 mm as per product listing.
- Outer carton or shipping packaging details not publicly described — only the retail pack specification is given
Usage
Not publicly listed
Contraindications
- Not for use on skin — designed for surface disinfection only; avoid contact with eyes, mucous membranes, and open wounds. (Aligned with standard IPA wipe safety guidance.)
- Not suitable for porous surfaces or materials that may be damaged by alcohol (e.g. some plastics, coatings, varnished wood) — test on small area before full application. (Common recommendation for alcohol surface wipes)
- Should not be used near open flames or heat sources; alcohol vapour is flammable. (Based on IPA chemical safety properties as described in technical data sheets)
Adverse Effects
- Potential eye or skin irritation if comes into contact with mucous membranes, eyes or broken skin — standard for alcohol-based disinfectants. (As per IPA wipes safety warnings from manufacturer data)
- Possible damage or discoloration to alcohol-sensitive surfaces (plastics, painted or varnished surfaces) — test on small area before use.
- Risk of fire or inhalation hazard if used near open flame or in poorly ventilated spaces due to alcohol vapour flammability.
Storage Conditions
- Store in original resealable packaging to maintain wipe wetness until use.
- Keep in a cool, dry, well-ventilated area away from heat sources, sparks, open flame or strong oxidising agents (due to isopropyl alcohol flammability). (Standard IPA storage guidance)
- Ensure container is properly sealed when not in use to prevent alcohol evaporation and drying of wipes. (Standard for pre-moistened wipes)
Duration
Not applicable (surface disinfectant wipes; not a medical treatment).
Onset
Immediate to within few minutes \u2014 alcohol kills susceptible microbes rapidly on contact; effectiveness certified under EN 1276 / EN 13727 standards when contact time is respected.
