Cleenol Impact Antibacterial Hard Surface Cleaner 750ml
Cleenol
Infection ControlPerfumed antibacterial hard surface cleaner spray (3-in-1 cleaner, sanitiser and deodoriser)
Certifications
- Conforms to BS EN 1276 (bactericidal activity of chemical disinfectants) when diluted to 4% (30 ml per 750 ml) and used with specified contact time.
- Antibacterial cleaner tested and shown to be effective against MRSA when used neat in challenge tests.
- Formulated and labelled in accordance with Regulation (EC) No 1272/2008 on classification, labelling and packaging (CLP).
- Detergent composition and labelling in line with Regulation (EC) No 648/2004 on detergents.
- Subject to EU Biocidal Products Regulation (EU) No 528/2012 regarding the placing on the market and use of biocidal products.
- Conforms to BS EN 1276 (bactericidal activity of chemical disinfectants) when diluted to 4% (30 ml per 750 ml) and used with specified contact time.
- Antibacterial cleaner tested and shown to be effective against MRSA when used neat in challenge tests.
- Formulated and labelled in accordance with Regulation (EC) No 1272/2008 on classification, labelling and packaging (CLP).
- Detergent composition and labelling in line with Regulation (EC) No 648/2004 on detergents.
- Subject to EU Biocidal Products Regulation (EU) No 528/2012 regarding the placing on the market and use of biocidal products.
Perfumed antibacterial hard surface cleaner spray (3-in-1 cleaner, sanitiser and deodoriser)
Description
Cleenol Impact Antibacterial Hard Surface Cleaner - 750ml is a professional 3-in-1 hard surface cleaner designed to clean, sanitise and deodorise in a single operation. The ready-to-use perfumed cleaner removes a wide range of soils from most washable hard surfaces, leaving them clean, hygienic and pleasantly fragranced. It contains a light floral fragrance and is based on quaternary ammonium biocides and non-ionic surfactants, providing both cleaning power and antibacterial activity. The product is supplied in a 750ml trigger-spray bottle and is intended for professional use for general hard-surface disinfection in washrooms and other non-food-preparation areas.
Bnefits
- 3-in-1 action: cleans, sanitises and deodorises in a single step, saving time and labour.
- Removes a wide range of soils from hard surfaces, leaving them visibly clean and hygienic.
- Contains a light floral fragrance that helps to mask unpleasant odours and leaves a fresh scent.
- Antibacterial formulation based on quaternary ammonium compounds to support effective disinfection.
- Approved and tested against MRSA when used neat, with proven antimicrobial efficacy in challenge tests.
- Conforms to BS EN 1276 when diluted to 4% (30 ml per 750 ml) with a specified contact time, demonstrating bactericidal performance.
- Suitable for one-stage cleaning and disinfection of most hard, washable surfaces including floors, walls and countertops.
- Clear blue liquid with moderate pH (around 7.9) that is easy to use in trigger spray applications.
- Moderately biodegradable formulation in line with EU detergents legislation for environmental compliance.
Indications
- Routine cleaning, sanitising and deodorising of most hard, washable surfaces in washrooms, toilets and general building areas.
- One-stage cleaning and disinfection of floors, walls, tiles, washroom fixtures, worktops and other non-porous surfaces.
- Situations where an antibacterial cleaner with a pleasant floral fragrance is required to control odours.
- Not recommended for use in food preparation areas, where product tainting of food may occur.
Composition
- QUATERNARY AMMONIUM COMPOUNDS, BENZYL (C12–C16) ALKYL DIMETHYL, CHLORIDES: 1–5% (biocidal active).
- ALCOHOLS, C12–C14, ETHOXYLATED: 1–5% (non-ionic surfactant).
- TURPENTINE, OIL: <1% (fragrance component).
- Water and other non-classified ingredients to 100%.
Formulation
- Clear blue liquid hard surface cleaner and sanitiser.
- Perfumed with a light floral fragrance.
- pH (concentrated solution): approximately 7.9.
- Non-viscous, water-soluble solution based on quaternary ammonium compound and non-ionic surfactant system.
- Antibacterial hard surface cleaner, supplied ready to use in trigger spray format.
Packaging
- 750 ml trigger-spray bottle for direct application to surfaces.
- Typically supplied in cases of 6 x 750 ml for professional use.
- SDS internal identification codes 082769 (6 x 750 ml) and 082777 (2 x 5 L) used by manufacturer.
Usage
- For general hard surface cleaning and disinfection, apply the product via trigger spray directly onto the surface.
- For heavy soiling, pre-clean if necessary, then spray the product evenly to wet the surface.
- Allow an appropriate contact time; when diluted to 4% (30 ml per 750 ml) the product conforms to BS EN 1276, typically with a 5-minute contact time against specified organisms.
- For MRSA control, use the product neat as indicated in manufacturer antimicrobial test data.
- After the required contact time, wipe the surface clean with a cloth or mop; rinsing is advisable on surfaces that may be in prolonged contact with skin.
- Do not use on food preparation surfaces or areas where food may be tainted by residual fragrance.
- For professional users only; always follow local cleaning and disinfection protocols and refer to the product label and Safety Data Sheet for full directions.
Contraindications
- Not to be used in food preparation areas or on food-contact surfaces where tainting of food may occur.
- Avoid use on surfaces that are not compatible with water-based detergents or quaternary ammonium compounds.
- Do not mix with other cleaning agents or chemicals, particularly other disinfectants or strong oxidising agents.
- Not intended for application to skin or for use as a hand or body cleanser.
Adverse Effects
- Causes skin irritation on prolonged or repeated contact; appropriate gloves should be worn.
- Causes serious eye damage; eye protection is recommended where splashing may occur.
- Very toxic to aquatic life and toxic to aquatic life with long lasting effects; avoid release to the environment.
- Ingestion may be harmful and can cause irritation or damage to the gastrointestinal tract.
- Inhalation of spray mists may cause respiratory irritation in poorly ventilated areas.
Storage Conditions
- Store in the original, tightly closed container.
- Store at temperatures between 0°C and 40°C in a cool, dry place.
- Keep away from direct sunlight, extreme heat and freezing conditions.
- Store out of reach of children and unauthorised persons.
- Avoid release to the environment and store away from foodstuffs and animal feed.
Duration
Used as needed for routine and periodic cleaning and disinfection of hard surfaces; contact time for disinfection is generally around 5 minutes, depending on use pattern and local protocols.
Onset
Begins to act immediately on application, with full bactericidal performance demonstrated after the specified contact time (for example, 5 minutes under BS EN 1276 test conditions).
