Logo
Hibiscrub 5ml Pump Dispenser for 500ml Bottle

Hibiscrub 5ml Pump Dispenser for 500ml Bottle

3S Healthcare

Infection control accessory
  • Sold as a non Sterile dispensing accessory for infection Control products; it is not a medicinal product and is not listed in MHRA medicinal product databases.
  • Intended for professional healthcare use and supplied through medical Equipment distributors that operate under relevant quality Management and regulatory frameworks (e.g. ISO 9001 and MHRA wholesale distribution licences at seller level).
5 ml bottle-top pump dispenser for 500 ml antiseptic skin cleanser bottles

Description

The Hibiscrub 5ml Pump Dispenser for 500ml Bottle is a reusable plastic bottle-top pump designed to fit all 500 ml HIBI brand products (such as Hibiscrub antimicrobial skin cleanser and related Hibi solutions). Once attached, each full depression of the pump dispenses an accurately measured 5 ml dose of product, helping to standardise application, minimise spillage and reduce wastage. It is intended for use in healthcare, veterinary and aesthetic/dermatology settings as a convenient and hygienic way to dispense Hibiscrub and other HIBI 500 ml bottles at sinks, scrub areas and treatment rooms, and can also be used in conjunction with compatible wall-mounted cage dispensers and brackets.

Bnefits

  • Provides a consistent 5 ml dose of Hibiscrub or other HIBI brand products with each full pump stroke, supporting standardised protocols for hand and skin cleansing.
  • Designed specifically to fit 500 ml HIBI brand bottles, including Hibiscrub antimicrobial skin cleanser and similar 500 ml formats.
  • Reduces spillage and product wastage compared with pouring directly from the bottle.
  • Improves convenience and ease of use at the point of care, especially when used with a wall-mounted cage or bracket.
  • Simple, robust plastic construction suitable for busy clinical environments where frequent dispensing is required.
  • Supports infection-control practice by allowing hands-free or elbow-assisted operation when used in combination with wall mounts and appropriate technique.
  • Can be used as a replacement pump when the original becomes worn or damaged, extending the useful life of Hibiscrub bottles.

Indications

  • Bottle-top dispensing of Hibiscrub antimicrobial skin cleanser from 500 ml bottles in hospitals, clinics, GP surgeries and community healthcare settings.
  • Use with other compatible 500 ml HIBI brand skin-cleansing or antiseptic solutions where a 5 ml dose per pump is appropriate.
  • Use in aesthetic and dermatology clinics to dispense Hibiscrub for pre-procedural skin cleansing and hand-washing at wash stations.
  • Use in veterinary practices and dental clinics for convenient dispensing of Hibiscrub from 500 ml bottles at sinks or scrub areas.
  • Applications where controlled dosing and reduced product waste are desirable for infection-control products supplied in 500 ml bottles.

Composition

  • Reusable plastic bottle-top pump assembly designed for 500 ml HIBI brand bottles (exact polymer composition not specified in publicly available listings).
  • Screw-on cap compatible with the neck and thread of standard 500 ml Hibiscrub/Hibi bottles.
  • Internal spring and piston mechanism to deliver an approximately 5 ml dose per full depression.
  • Dip-tube cut to reach near the bottom of a 500 ml bottle for efficient evacuation of the product.

Formulation

  • Non-sterile mechanical pump dispenser for external liquid products.
  • Calibrated to dispense approximately 5 ml per full stroke when used with Hibiscrub or similar viscosity HIBI solutions.
  • Intended for multiple uses over the life of one or more 500 ml bottles, subject to local infection-control and decontamination policies.
  • Compatible with 500 ml HIBI brand plastic bottles for Hibiscrub and related products; not designed for other bottle sizes or neck types.

Packaging

  • Supplied as a single 5 ml pump dispenser (pump only – bottle not included).
  • Individually packed (typically in a clear protective sleeve or small carton) for transit from distributor to end user.
  • Outer trade packaging (cartons containing multiple pumps) used by distributors for bulk supply to healthcare organisations.

Usage

  • Ensure the 500 ml Hibiscrub or other compatible HIBI bottle is closed and on a stable surface.
  • Remove and discard the original screw cap from the 500 ml bottle, following local waste and recycling policies.
  • Screw the 5 ml pump dispenser firmly onto the bottle, ensuring it is fully tightened and upright so that it forms a secure seal.
  • If required, cut or adjust the dip-tube length according to manufacturer or local guidance so that it reaches near the bottom of the bottle without kinking (most units are pre-sized for 500 ml bottles).
  • Prime the pump by pressing down several times until liquid begins to dispense, confirming that each full stroke delivers an even, controlled dose.
  • To dispense, place hands or a suitable receptacle under the nozzle and press the pump fully down; each full stroke delivers approximately 5 ml of product.
  • After each use, ensure the nozzle is left clean and, where applicable, rotated or covered according to local infection-control procedures to minimise contamination and drying.
  • The pump can be used in conjunction with a wall-mounted Hibiscrub cage or bracket by first installing the cage and then placing the 500 ml bottle with fitted pump into the holder.
  • Clean the external surfaces of the pump regularly in line with local decontamination policies, avoiding harsh solvents that may degrade the plastic.
  • Replace the pump if it becomes damaged, leaks, fails to return fully after pressing, or no longer dispenses an accurate dose.

Contraindications

  • Not suitable for use with bottles other than compatible 500 ml HIBI brand products unless the neck size and thread are confirmed as compatible by the user or supplier.
  • Should not be used if the pump, dip-tube or screw threads are visibly damaged, cracked, excessively worn or contaminated.
  • Not intended for use with highly viscous, particulate or incompatible chemicals that could damage the pump mechanism or leach into the plastic.
  • Not a sterile device and should not be used in applications requiring sterile dispensing unless local protocols explicitly permit and controls are in place.

Adverse Effects

  • If fitted incorrectly or cross-threaded, the pump may leak, leading to product wastage and potential slip hazards from spilled liquid.
  • Breakage or sharp edges from damaged plastic components could present a minor risk of cuts or abrasions.
  • Inadequate cleaning or prolonged use contrary to infection-control policies could allow external surfaces of the pump to harbour microorganisms.

Storage Conditions

  • Store unused pumps in a clean, dry environment away from excessive heat and direct sunlight.
  • Avoid crushing, bending or placing heavy objects on top of pumps during storage or transport to prevent deformation of the plastic components or dip-tube.
  • Once fitted to a bottle, keep the assembled unit in a normal clinical environment as per the storage requirements of the Hibiscrub or other HIBI product being dispensed.
  • Do not expose the pump to strong solvents or disinfectants that are incompatible with common medical-grade plastics, unless confirmed as safe by local guidance.

Duration

Not applicable \u2013 this is a reusable dispensing accessory with no direct therapeutic action. It is intended for ongoing use for as long as it remains functional, hygienic and compatible with 500 ml HIBI bottles, in line with local infection-control policies.

Onset

Not applicable \u2013 as a mechanical dispensing device it has no pharmacological onset of effect; it immediately enables controlled dispensing of product once fitted and primed.

Browse more Infection control accessory

Top Treatments

Top Cities in the UK