Logo
Clinisept+ Prep & Procedure 490ml

Clinisept+ Prep & Procedure 490ml

Clinisept+

Antimicrobial skin cleanser
  • Antimicrobial efficacy independently tested to BS EN 1040 (basic bactericidal activity).
  • Antimicrobial efficacy independently tested to BS EN 1275 / BS EN 1650 (fungicidal/yeasticidal activity).
  • Antimicrobial efficacy independently tested to BS EN 1276 / BS EN 13727 (bactericidal activity in medical area).
  • Antimicrobial efficacy independently tested to BS EN 13704 (sporicidal activity).
  • Dermatologically tested and proven non Irritant to skin and eyes.
  • Non Cytotoxic to re Growing skin cells.
  • Manufactured in the UK under ISO 22716 (Cosmetics GMP) and ISO 13485 (Medical Device) accredited quality systems.
  • Alcohol Free, chlorhexidine Free, fragrance Free and colourant Free formulation.
  • Not subject to antimicrobial resistance due to oxidising mode of action.
Pre-, intra- and post-procedure hypochlorous skin prep

Description

Clinisept+ Prep & Procedure 490ml is a professional fast-acting skin cleanser and antimicrobial solution developed for use in aesthetic, dermatological and cosmetic clinics. Using advanced high-purity hypochlorous technology, it provides highly effective antimicrobial cleansing while maintaining complete skin compatibility. The solution delivers rapid broad-spectrum microbial kill with a required wet contact time of only 15 seconds and is proven non-toxic, non-irritant to skin and eyes, non-sensitising and non-cytotoxic. Clinisept+ Prep & Procedure cleanses, calms and cares for the skin, reducing the appearance of redness and helping to create optimal conditions for skin recovery and regeneration following procedures. It is free from alcohol, chlorhexidine, fragrance and colourants and leaves no residue or chemical burden on the skin. The 490ml in-clinic bottle (formerly 500ml) is intended for use before, during and after aesthetic procedures as part of best-practice infection control and patient safety.

Bnefits

  • Provides highly effective antimicrobial skin cleansing using advanced hypochlorous technology
  • Rapid action with a required wet contact time of only 15 seconds
  • Delivers superior protection against infection before, during and after aesthetic procedures
  • Skin-neutral pH and high-purity chemistry that is non-toxic, non-irritant and non-sensitising
  • Non-cytotoxic to re-growing skin cells, supporting natural skin regeneration
  • Cleans, calms and cares for the skin while helping to reduce redness and post-treatment discomfort
  • Leaves no residue or chemical build-up on the skin, minimising chemical burden
  • Free from alcohol, chlorhexidine, fragrance and colourants
  • Not subject to antimicrobial resistance due to oxidising mode of action
  • Dermatologically tested and suitable for normal and sensitive skin
  • Supports improved clinical outcomes and best-practice hygiene in professional clinics

Indications

  • Pre-procedure skin preparation for aesthetic and cosmetic treatments (e.g. injectables, dermal fillers, toxins)
  • Skin cleansing prior to microneedling, microblading, micropigmentation and similar needling procedures
  • Use before and during laser treatments, chemical peels and other energy-based or resurfacing procedures
  • Maintenance of optimal skin hygiene during procedures to reduce risk of infection and complications
  • Immediate post-procedure cleansing to calm the skin, reduce visible redness and support recovery
  • General professional skin prep where a gentle, alcohol- and chlorhexidine-free antimicrobial cleanser is required

Composition

  • Water (Aqua)
  • Phosphoric Acid
  • Sodium Hypochlorite (0.03% w/w hypochlorous chemistry)

Formulation

  • High-purity, stabilised hypochlorous (HOCl) aqueous skin-cleansing solution
  • Fast acting skin cleanser and antimicrobial solution with skin-neutral pH
  • Alcohol-free, chlorhexidine-free, fragrance-free and colourant-free
  • Dermatologically tested, non-toxic, non-irritant, non-sensitising and non-cytotoxic

Packaging

  • 1 x 490ml (professional in-clinic) bottle of Clinisept+ Prep & Procedure (commonly supplied as a pump or standard bottle, formerly labelled 500ml)
  • Bottle and components fully recyclable where local facilities exist

Usage

  • Ensure the patient’s skin is visibly clean before application; remove any make-up or surface contaminants with a suitable remover.
  • Wash hands thoroughly and prepare an aseptic field; wear appropriate gloves before starting the procedure.
  • Decant a sufficient amount of Clinisept+ Prep & Procedure into a clean disposable gallipot, or apply directly from the bottle onto a sterile gauze or cleansing pad. Use a fresh, clean gallipot for each patient and discard any unused solution after the procedure.
  • Apply by thoroughly wetting a sterile gauze or cleansing pad with Clinisept+ and gently wiping over the whole area to be treated using a circular motion, ensuring the skin is completely wetted.
  • Approximately 10 ml is sufficient to saturate a standard 10 cm cotton gauze pad; typical recommended volume per treatment is 30–50 ml, adjusted according to the size of the treatment area.
  • If treating around the eyes, ask the patient to close their eyes before wiping over the eyelids.
  • Allow Clinisept+ to remain in wet contact with the skin for at least 15 seconds to achieve effective antimicrobial action.
  • Once applied, Clinisept+ Prep & Procedure leaves no residue on the skin and can be left to dry naturally. Do not dry or touch the skin after application unless with sterile gauze, a dressing pad, clean towel, or clean gloved hands.
  • During the procedure, Clinisept+ may be reapplied using fresh sterile gauze or pads as required to maintain high levels of hygiene; discard used pads after each pass.
  • Immediately following the procedure, for maximum care of recovering or irritated skin, thoroughly soak a gauze mask/square or cleansing pad with Clinisept+ and leave it placed on the treated area for 5–10 minutes to cool, calm and reduce redness. Repeat as necessary.
  • For professional use only. External use on skin and mucosa; do not ingest. Avoid direct eye contact; if contact occurs, rinse with copious amounts of water.

Contraindications

  • Do not use in patients with known hypersensitivity or allergy to any of the ingredients (water, phosphoric acid, sodium hypochlorite/hypochlorous acid).
  • For external use only; do not ingest.
  • Avoid contact with eyes; if contact occurs, rinse immediately with running water and seek medical advice if irritation persists.
  • Avoid direct contact with clothing and textiles, as the solution may cause discolouration.
  • Cease use if irritation or adverse reaction occurs and seek advice from a healthcare professional.
  • Do not decant into another storage container; only decant into a disposable gallipot for immediate use and discard any unused solution after the procedure.

Adverse Effects

Not publicly listed

Storage Conditions

  • Avoid extremes of temperature and keep out of direct sunlight.
  • Store in the original container with cap or pump securely closed when not in use.
  • Use within 3 months of opening.
  • Keep out of reach of children.
  • Dispose of used gallipots, gauze and pads according to local clinical waste procedures; the product itself requires no special disposal method.
  • All components are fully recyclable where appropriate recycling streams are available.

Duration

Used as a single-use cleanser before, during and immediately after each aesthetic procedure; may be reapplied throughout the procedure and immediately post-treatment as required to maintain hygiene and support recovery.

Onset

Rapid antimicrobial action with a required wet contact time of approximately 15 seconds for effective microbial kill.

Browse more Antimicrobial skin cleanser

Top Treatments

Top Cities in the UK