Baxter Blood Administration Set

Baxter

Injection & Infusion

Blood transfusion/administration set

Manufactured by Baxter Healthcare, a major regulated medical device company supplying sets globally.
Conforms to standard specifications for single Use blood administration/transfusion sets (sterile, disposable, with blood filter and non Vented spike) as per clinical transfusion practice guidelines.

Manufactured by Baxter Healthcare, a major regulated medical device company supplying sets globally.
Conforms to standard specifications for single Use blood administration/transfusion sets (sterile, disposable, with blood filter and non Vented spike) as per clinical transfusion practice guidelines.

Blood transfusion/administration set

Description

The Baxter Blood Administration Set is a sterile, disposable transfusion set designed for the safe administration of whole blood or blood components via gravity. It features transparent tubing of 4.04 mm internal diameter, a non-vented spike protected by a sheath for bag access, two flexible drip chambers (upper chamber with a 180-200 µm blood filter, lower chamber containing a ball-valve for flow regulation), a roller clamp for flow control, and a male luer lock connector. Supplied as a box of 50 single-use sets, it enables reliable and controlled blood transfusion in hospital and clinical settings.

Bnefits

Integrated 180–200 µm filter helps remove micro-aggregates and small clots, enhancing transfusion safety.
Ball-valve drip chamber design provides controlled flow and reduces air embolism risk.
Large internal diameter tubing (4.04 mm) permits adequate flow rate for blood transfusion.
Non-vented spike and protected sheath help maintain sterility during bag spike insertion.
Single-use, sterile and disposable — reduces cross-contamination and infection risk compared to reusable sets.

Indications

Transfusion of whole blood or blood components (red cells, plasma, platelets) in hospital or clinical settings.
Use whenever safe, filtered, gravity-based administration of blood/blood products is required.
Suitable for general wards, intensive care units, emergency departments, blood banks and transfusion services.

Composition

Medical-grade PVC or PVC-blend tubing (internal diameter ~4.04 mm).
Plastic non-vented spike (polypropylene or similar) with protective sheath.
Drip chamber(s) made of transparent medical-grade plastic.
Blood filter membrane rated 180–200 µm inside upper chamber.
Ball-valve assembly in lower chamber to prevent backflow or air aspiration.
Roller clamp made of medical-grade plastic for flow regulation.
Male Luer lock connector (polypropylene or similar) at distal end.

Formulation

Sterile, single-use, non-vented gravity blood administration set with integrated blood filter and drip-chamber design.
Tubing length and internal diameter engineered for optimal flow of blood and components.
Set intended for manual gravity-based flow; no pump required when used per instructions.

Packaging

Box containing 50 individually packaged sterile blood administration sets.
Each set supplied sterile, individually wrapped/blister-packed and labelled with product code (TRMMC2071B), batch number and expiry date.

Usage

Inspect packaging for integrity and expiry date before use.
Use aseptic technique: spike the blood bag using the non-vented spike with protective sheath, ensuring sterility.
Prime the tubing gently to expel air before connecting to the patient’s IV access.
Use the roller clamp to control and regulate flow rate as required by transfusion protocol.
Monitor the drip chamber and filter; ensure the filter and valve function correctly throughout the transfusion.
Discard the set after a single use according to biohazard waste disposal protocols.
Do not reuse or attempt to re-sterilise the set.

Contraindications

Not for use with non-blood fluids requiring a vented or pump-compatible administration set.
Not suitable if packaging is damaged or sterility is compromised.
Not to be reused — single-use only.
Not compatible with infusion pumps that require vented or non-filter sets, unless validated by manufacturer.

Adverse Effects

Risk of air embolism if tubing is not primed properly before transfusion.
Potential hemolysis or blood cell damage if flow rate is too high or set is incorrectly used.
Allergic or sensitivity reactions if patient is sensitive to PVC or plasticiser (rare).
Risk of contamination/infection if aseptic technique is not strictly followed or set is reused.

Storage Conditions

Store in a dry, cool place away from direct sunlight and excessive heat or cold.
Keep in original sealed packaging until use to maintain sterility.
Avoid exposure to sharp objects or conditions that might damage packaging or tubing integrity.