Independently tested to meet or exceed EN14476:2013 + A1:2015 for virucidal activity in the medical area (for relevant Continu hand products).
Tested to EN13727:2012 + A2:2015 for bactericidal activity in the medical area and EN13624:2013 for fungicidal activity (Continu range).
Tested as a hygienic hand rub product under EN13727:2012 + A1:2013 (Continu hand formulations).
Independently tested to meet or exceed EN14476:2013 + A1:2015 for virucidal activity in the medical area (for relevant Continu hand products).
Tested to EN13727:2012 + A2:2015 for bactericidal activity in the medical area and EN13624:2013 for fungicidal activity (Continu range).
Tested as a hygienic hand rub product under EN13727:2012 + A1:2013 (Continu hand formulations).
Conforms to EN test standards for effectiveness against bacteria, fungi, yeasts and viruses, including enveloped viruses.
Not classified as hazardous under Regulation (EC) No. 1272/2008 (CLP) at supplied concentration.
Description
Continu Hand Foam 600ml (Continu Anti-Microbial Hand Sanitising Foam) is an alcohol-free, water-based antimicrobial hand sanitiser supplied in a 600 ml foam pump bottle. Developed for use in medical and dental settings, it cleans and disinfects hands to EN test standards without causing the dryness or irritation commonly associated with alcohol-based products. The mild but powerful formulation has a pleasant neutral odour and is gentle enough for frequent use, with many users reporting a conditioning effect on the skin and improvement of dermatitis and other skin conditions when switching from traditional hand rubs. The foam is intended for use without water on visibly clean hands between patients, providing fast-acting, broad-spectrum antimicrobial activity while maintaining excellent skin tolerance and supporting HTM 01-05 compliance when wall-mounted in appropriate dispensers or used alongside disposable cartridge systems.
Bnefits
Alcohol-free disinfection solution that does not cause dryness or irritation to the skin, even with frequent use.
Users report a conditioning effect on the skin and improvement in dermatitis and other skin conditions compared to alcohol-based products.
Cleans and disinfects hands to EN test standards, providing broad-spectrum activity against bacteria, fungi, yeasts and viruses.
Effective from around 30 seconds contact time when used as directed, supporting rapid hand decontamination between patients.
Mild but powerful formula is gentler on hands than traditional surgical scrubs while maintaining high antimicrobial efficacy.
Pleasant neutral smell, avoiding the harsh odour of many alcohol-based sanitisers.
Same hazard rating as water according to manufacturer information and SDS, simplifying COSHH risk assessment.
Supplied in convenient 600 ml foam pump bottles that can be wall mounted to help meet HTM 01-05 requirements for hand hygiene facilities.
Water-based, non-flammable formulation with no hazard pictograms under CLP, improving safety in storage and use.
Manufactured in the UK as part of the wider Continu alcohol-free disinfection range for medical and dental environments.
Conforms to EN test standards for effectiveness against bacteria, fungi, yeasts and viruses, including enveloped viruses.
Not classified as hazardous under Regulation (EC) No. 1272/2008 (CLP) at supplied concentration.
REACH compliant; contains no substances on the REACH candidate list or Annex XIV and no substances subject to export restrictions under Regulation (EU) No. 649/2012.
Alcohol Free, water Based formulation with the same hazard rating as water according to manufacturer documentation.
Designed to support HTM 01 05 compliance when used in suitable wall Mounted systems with disposable cartridges or pump dispensers.
REACH compliant; contains no substances on the REACH candidate list or Annex XIV and no substances subject to export restrictions under Regulation (EU) No. 649/2012.
Alcohol Free, water Based formulation with the same hazard rating as water according to manufacturer documentation.
Designed to support HTM 01 05 compliance when used in suitable wall Mounted systems with disposable cartridges or pump dispensers.
Alcohol-free antimicrobial hand sanitising foam
Alcohol-free hand sanitising on visibly clean hands between patient treatments in medical and dental settings.
Routine antimicrobial hand disinfection for clinical staff where water is not immediately available.
Hand hygiene for individuals who experience dryness, irritation or dermatitis with alcohol-based sanitisers.
Use as part of a hand hygiene protocol in dental surgeries, clinics, podiatry practices and other healthcare environments.
Situations where non-flammable, low-hazard hand disinfectants are preferred for safety or regulatory reasons.
Composition
Mixture of water and quaternary ammonium compounds (QACs) as active biocidal ingredients.
Sodium ethylhexyl sulfate (CAS 308062-28-4), classified as Eye Dam. 1 (H318), present at <1%.
Didecyldimethylammonium chloride (CAS 7173-51-5), classified as Acute Tox. 4 (H302) and Skin Corr. 1B (H314), present at <0.5%.
Overall mixture not classified as hazardous under Regulation (EC) No. 1272/2008 because no single ingredient is present at >0.092%.
Water-based, colourless liquid foam with characteristic mild odour.
pH approximately 6–8; density around 0.99–1.05 g/cm³ at 20 °C.
Free from ethyl or isopropyl alcohol; non-flammable.
Formulated for personal hygiene use on hands in dental practices and general healthcare settings.
Formulation
Ready-to-use alcohol-free antimicrobial hand sanitising foam.
Water-based, low-hazard formulation with quaternary ammonium compounds as the primary active agents.
Non-flammable, non-corrosive at use concentration, and not classified as hazardous under CLP.
pH-balanced formulation (approx. pH 6–8) designed to be gentle on skin during frequent use.
Foaming pump presentation provides controlled dosing and good hand coverage without dripping.
Pleasant, neutral odour to enhance user acceptability in clinical environments.
Packaging
Primary pack: 600 ml pump bottle of Continu Anti-Microbial Hand Sanitising Foam.
Bottle type: plastic bottle fitted with a foam pump dispenser for easy, mess-free application.
Typical supply format: box of 6 x 600 ml pump bottles for wall mounting or placement in clinical areas (per manufacturer and distributor information).
Intended for professional use in medical, dental, podiatry and other healthcare environments.
Non-sterile cosmetic/biocidal product for external use on hands only.
Usage
Ensure hands are visibly clean; remove gross soiling with soap and water if necessary before using the foam.
Dispense an adequate amount of Continu Hand Foam into the palm of one hand using the pump dispenser.
Rub hands together thoroughly, ensuring full coverage of palms, backs of hands, fingers, thumbs, fingertips and spaces between the fingers.
Continue rubbing for at least 30 seconds, or for the contact time specified in local hand hygiene protocols, until the foam has completely evaporated and hands are dry.
Do not rinse hands with water after application; the foam is designed for use without water.
Repeat application as required between patients or procedures according to local infection-control guidance.
For wall-mounted or HTM 01-05 compliant installations, mount the pump bottle in a suitable bracket or use compatible disposable-cartridge systems as recommended by the manufacturer.
Avoid contact with eyes and mucous membranes; if contact occurs, rinse immediately with plenty of clean water.
Contraindications
Individuals with known hypersensitivity or allergy to quaternary ammonium compounds, sodium ethylhexyl sulfate or any other component of the formulation.
Do not use on broken, heavily abraded or severely irritated skin unless advised by a healthcare professional.
Not intended for use on mucous membranes, eyes, or ingestion.
Do not mix with other hand hygiene products in the same dispenser or bottle.
Adverse Effects
When used as directed, the product is generally well tolerated and is not expected to cause significant irritation.
In rare cases, mild transient skin irritation, redness or dryness may occur, particularly in individuals with very sensitive skin.
Very rare allergic contact reactions (e.g. to quaternary ammonium compounds) may occur; discontinue use if signs of hypersensitivity such as itching, redness or rash develop and seek medical advice if symptoms persist.
Accidental eye contact may cause mild, transient irritation or watering; rinse with clean water for at least 15 minutes and seek medical attention if discomfort continues.
Ingestion may cause mild gastrointestinal upset; rinse mouth and seek medical advice if symptoms arise or persist.
Storage Conditions
Store upright in the original, tightly closed container at room temperature.
Keep away from direct sunlight and extremes of temperature; do not freeze.
Store in a cool, dry, well-ventilated area away from strong oxidising agents and strong acids.
Keep out of reach of children and unauthorised persons.
Ensure caps and pump mechanisms are closed when not in use to prevent leaks and contamination.
Avoid releasing large quantities into drains or watercourses; dispose of surplus product and empty containers according to local regulations.
Duration
Used as a single-episode hand sanitiser for each application; duration is limited to the contact time until the foam has fully dried on the hands. The 600 ml bottle provides multiple applications for ongoing daily use.
Onset
Antimicrobial action begins immediately upon application and is effective from approximately 30 seconds contact time when used as directed and in accordance with EN test standards.
