Paramedic Helmet
Alexandra
Protective workwearParamedic rescue helmet / PPE head protection
Certifications
- Certified to EN443 (helmets for firefighting in buildings and other structures).
- Certified to EN166 (personal eye protection – relevant for helmet/eye protection interface compatibility).
- Intended to comply with applicable European/UK PPE legislation for head protection (e.g. EU Regulation (EU) 2016/425 on personal protective equipment or its UK equivalent).
- Certified to EN443 (helmets for firefighting in buildings and other structures).
- Certified to EN166 (personal eye protection – relevant for helmet/eye protection interface compatibility).
- Intended to comply with applicable European/UK PPE legislation for head protection (e.g. EU Regulation (EU) 2016/425 on personal protective equipment or its UK equivalent).
Paramedic rescue helmet / PPE head protection
Description
The Alexandra Paramedic Helmet (SKU 2797) is a high-performance protective helmet designed for paramedics and emergency medical personnel working in demanding environments. It features a lightweight Kevlar® shell combined with a PU (polyurethane) impact liner to provide excellent impact and penetration resistance while minimising weight. A leather headband and leather crown comfort cap enhance comfort during prolonged wear, while the ratchet adjustment system and two-point chinstrap ensure a secure and easily adjustable fit. SCBA clip mounts are integrated to accommodate self-contained breathing apparatus when required. The helmet is certified to EN443 (firefighting helmets) and EN166 (personal eye protection interface), and is supplied in a one-size configuration with adjustable internal harness.
Bnefits
- Lightweight Kevlar® shell provides high impact resistance with reduced weight, aiding comfort during long shifts.
- PU impact liner enhances energy absorption and shock protection in the event of impacts.
- Leather headband and leather crown comfort cap improve comfort, fit and perspiration management for extended wear.
- Ratchet adjustment allows rapid, precise fitting to different head sizes within the one-size design.
- Two-point chinstrap helps maintain helmet stability and retention during active emergency operations.
- SCBA clip mounts enable safe and secure integration with self-contained breathing apparatus (SCBA) where required.
- Certified to EN443 and EN166, demonstrating compliance with recognised European standards for firefighting helmets and eye-protection interfaces.
- Designed specifically for paramedic and emergency medical services use, complementing paramedic clothing and scrubs ranges.
Indications
- Head protection for paramedics and emergency medical personnel during pre-hospital care and rescue operations.
- Use in environments where there is a risk of head impact, falling debris, or other mechanical hazards.
- Situations where integration with SCBA or respiratory protection is required as part of emergency response.
- Use alongside other PPE such as protective eyewear, gloves and high-visibility garments in accordance with local risk assessments.
Composition
- Outer shell: lightweight Kevlar® (aramid fibre composite) helmet shell.
- Inner liner: PU (polyurethane) impact liner for energy absorption.
- Headband: leather headband for comfort and fit.
- Crown: leather crown comfort cap.
- Chinstrap: two-point adjustable chinstrap (material not specified in public product data).
- Integrated SCBA clip mounts for attachment of compatible self-contained breathing apparatus components.
Formulation
- One-size, high-performance paramedic rescue helmet with adjustable internal harness.
- Kevlar® composite shell with PU impact liner and leather comfort components.
- Equipped with ratchet size adjustment, two-point chinstrap and SCBA clip mounts.
- Certified to EN443 and EN166 for use as part of compliant PPE ensembles.
Packaging
- Supplied as a single helmet (unit quantity: 1).
- Individual retail/transport packaging (exact packaging configuration may vary by distributor).
Usage
- Before first use, inspect the helmet for any visible damage, cracks, deformation or missing components. Do not use a damaged helmet.
- Adjust the internal headband and leather crown comfort cap to fit the wearer’s head snugly but comfortably.
- Use the ratchet adjustment mechanism at the rear of the helmet (or as fitted) to fine-tune the fit until the helmet is stable on the head.
- Place the helmet squarely on the head, ensuring it sits level and covers the forehead as intended.
- Fasten the two-point chinstrap securely under the chin and adjust so that it is snug without causing discomfort; check that the helmet cannot be easily dislodged when the wearer moves or bends.
- When required, attach compatible SCBA components to the SCBA clip mounts according to the SCBA manufacturer’s instructions and local protocols.
- Use with appropriate eye and face protection in line with EN166 and local PPE policies (e.g. safety goggles or visor compatible with the helmet).
- After each use, visually check the helmet for signs of impact, cracking, deformation, chemical splashes or heat damage; remove from service and replace if any structural damage is suspected.
- Clean the shell and external components using mild detergent and water or manufacturer-recommended cleaning agents; avoid harsh solvents or abrasives that may degrade the helmet materials.
- Allow the helmet to dry naturally away from direct heat sources before storage.
- Follow any additional instructions provided by the brand or supplier and comply with local PPE inspection and replacement schedules.
Contraindications
- Not intended for use outside the scope of its certification (e.g. not for use as industrial climbing equipment or motorcycle helmet).
- Do not use if the helmet has sustained a significant impact, shows visible cracks, deformation, melted areas or other damage.
- Do not use if any component (shell, liner, chinstrap, ratchet system or SCBA clips) is missing, excessively worn or non-functional.
- Not suitable for users whose head size or shape cannot be accommodated safely within the one-size adjustable range.
- Use only in combination with compatible SCBA and accessories as specified by the respective equipment manufacturers and local safety policies.
Adverse Effects
- Prolonged wear may cause local pressure, discomfort or skin irritation on the scalp, forehead or under the chinstrap in some users.
- Improper adjustment or loose chinstrap may reduce protective performance and increase the risk of injury during impact.
- Excessive tightening of the headband or chinstrap may cause headaches or pressure marks.
- Use in high-heat or chemically aggressive environments beyond the helmet’s tested limits may result in material degradation and reduced protection if not managed according to safety guidelines.
Storage Conditions
- Store in a cool, dry, well-ventilated place away from direct sunlight when not in use.
- Keep away from sources of excessive heat, open flame, or chemicals/solvents that could degrade the Kevlar® shell, PU liner or leather components.
- Do not place heavy objects on top of the helmet or store it in a way that could deform the shell or liner.
- Follow routine PPE inspection schedules and manufacturer or supplier guidance for maximum service life and replacement intervals.
Duration
Not applicable \u2013 this is a protective PPE helmet worn for the duration of paramedic or emergency response activities where head protection is required.
Onset
Immediate \u2013 protective effect is provided as soon as the helmet is correctly fitted and secured on the wearer\u2019s head.
| Price | Link |
|---|---|
| £441.59 | https://www.medisave.co.uk/products/paramedic-helmet |
