Formulated and labelled in accordance with Regulation (EC) No 1272/2008 (CLP) for classification, labelling and packaging of substances and mixtures, as stated in the safety data sheet.
Supplied with an EU Compliant Safety Data Sheet (SDS) for Clinell Sterile Alcohol Wipes (Issue Date 11 May 2021, Version 1, status published 13 May 2024).
Tested and classified as containing 70% propan 2 Ol with hazard classes Flam. Liq. 2, Eye Irrit. 2, STOT SE 3, with corresponding hazard statements H225, H319 and H336.
Manufactured by GAMA Healthcare Ltd, a UK Based infection prevention company producing Clinell Branded disinfectant products for healthcare environments.
Formulated and labelled in accordance with Regulation (EC) No 1272/2008 (CLP) for classification, labelling and packaging of substances and mixtures, as stated in the safety data sheet.
Supplied with an EU Compliant Safety Data Sheet (SDS) for Clinell Sterile Alcohol Wipes (Issue Date 11 May 2021, Version 1, status published 13 May 2024).
Tested and classified as containing 70% propan 2 Ol with hazard classes Flam. Liq. 2, Eye Irrit. 2, STOT SE 3, with corresponding hazard statements H225, H319 and H336.
Manufactured by GAMA Healthcare Ltd, a UK Based infection prevention company producing Clinell Branded disinfectant products for healthcare environments.
Clinell Alcohol Wipes Sterile Sachets 100 are single-use, individually wrapped sterile wipes designed for rapid skin disinfection before injections and for the disinfection of non-invasive medical devices and small surfaces. Each wipe is pre-saturated with 70% pharmaceutical-grade isopropyl alcohol (propan-2-ol), providing fast-acting, ultra-quick drying, smear-free disinfection. The formulation is proven to kill 99.999% of bacteria including MRSA, Escherichia coli, Pseudomonas and Enterococcus. The wipes are supplied in a convenient box of 100 tear-to-open sachets, offering a portable, hygienic solution for pre-injection skin cleansing and general clinical use.
Bnefits
Pre-injection skin disinfection: specifically intended to disinfect the skin before injections to help reduce the risk of infection.
High antimicrobial efficacy: pre-saturated with 70% pharmaceutical-grade isopropyl alcohol, killing 99.999% of bacteria including MRSA, E. coli, Pseudomonas and Enterococcus.
Sterile and individually wrapped: each wipe is sterile and packed in its own tear-to-open sachet to maintain hygiene until use.
Ultra-quick drying and smear-free: alcohol-based formula evaporates rapidly, leaving no visible residue and allowing quick procedure times.
Single-use to minimise cross-contamination: designed for one-time use per patient or application.
Versatile use: suitable for disinfecting skin and non-invasive medical devices and small surfaces in clinical and aesthetic environments.
Compact box of 100: convenient dispenser-style carton for easy storage and access in clinics, treatment rooms and emergency kits.
Indications
Pre-injection skin disinfection prior to injections and other percutaneous procedures.
Rapid disinfection of skin where a sterile alcohol wipe is required.
Disinfection of non-invasive medical devices and small hard surfaces, as identified in the manufacturer safety data sheet.
Use in medical, dental, aesthetic and outpatient settings where quick skin or device disinfection is required.
Composition
Propan-2-ol (isopropyl alcohol) 70% w/w (declarable component in mixture).
Remaining 30%: water and non-declarable components (not specifically listed by manufacturer).
Wipe substrate: non-woven sterile wipe material contained within individual sachets (37 gsm stated by some distributors; full fibre composition not listed).
Formulation
Sterile, non-woven wipe pre-saturated with 70% isopropyl alcohol solution.
Moist wipe saturated with colourless alcoholic liquid (as described in the safety data sheet).
Dermatologically suitable for intact skin when used according to instructions; designed as a pre-injection swab and for disinfection of non-invasive medical devices.
Packaging
Box of 100 individually wrapped sterile sachet wipes.
Each wipe size approximately 165 mm × 105 mm (dimensions provided by distributors).
Sachets are tear-to-open, single-use, sterile packets.
Tear open one sterile sachet along the indicated notch to remove the wipe.
Apply the wipe to the area of skin to be disinfected using a firm, circular or back-and-forth motion to ensure complete coverage.
Allow the area to air dry completely before performing the injection or procedure; do not blow on or wipe dry the area.
Use each wipe once only and discard immediately after use; do not reuse on another site or patient.
For non-invasive medical devices or small surfaces, wipe thoroughly and allow to air dry.
Use in well-ventilated areas and keep away from sources of ignition due to flammability of the 70% isopropyl alcohol.
Wash hands after use and avoid contact with eyes and mucous membranes.
Contraindications
Do not use on broken or severely damaged skin unless directed by a healthcare professional.
Avoid contact with eyes and mucous membranes; not for intraocular or mucosal use.
Not intended for use on large areas of skin for prolonged periods.
Do not use in individuals with known hypersensitivity or allergy to isopropyl alcohol (propan-2-ol).
Do not use near open flames, ignition sources or while smoking due to high flammability of the alcohol content.
Adverse Effects
May cause eye irritation if the liquid or vapour comes into contact with eyes.
Vapours may cause drowsiness or dizziness in poorly ventilated areas or with excessive exposure.
Prolonged or repeated exposure may cause mild skin dryness or irritation in sensitive individuals.
Inhalation or ingestion of the liquid is not intended and may cause systemic alcohol-related effects; seek medical advice if accidental ingestion or significant inhalation occurs.
Storage Conditions
Store in a cool, dry, well-ventilated area away from direct sunlight and sources of heat or ignition.
Keep the outer carton closed and sachets in their original packaging until use to maintain sterility and prevent evaporation.
Keep away from sparks, open flames and hot surfaces; no smoking near stored product.
Store out of the reach of children.
Follow any local regulations for storage of flammable materials containing isopropyl alcohol.
Duration
Single-use, momentary application for pre-injection or surface disinfection; not intended for ongoing or repeated treatment of the same site beyond procedural preparation.
Onset
Fast-acting; disinfection achieved within the contact time required for 70% isopropyl alcohol as per relevant EN test methods, typically within seconds to a few minutes after application and drying (exact contact time not stated on retail listing).
