Clinell Alcohol Wipes x 100 are high-quality, durable disinfectant wipes saturated with 70% pharmaceutical grade isopropyl alcohol. Supplied as a box of 100 individually wrapped sachets, they act as a rapid, no-smear disinfectant for non-invasive medical devices, equipment and hard surfaces, or as pre-injection / pre-procedure swabs. With proven bactericidal action, Clinell Alcohol Wipes kill at least 99.999% of germs, including common healthcare-associated pathogens, in accordance with EN1276 and EN13727. The medical grade isopropyl alcohol evaporates quickly, leaving no residue, making the wipes suitable for use on a wide range of surfaces such as glass, stainless steel and monitor screens.
Bnefits
High-performance disinfectant wipes saturated with 70% pharmaceutical grade isopropyl alcohol.
Rapid bactericidal action, killing at least 99.999% of germs according to EN1276 and EN13727.
Acts as a rapid disinfectant for non-invasive medical devices and equipment, or as a pre-injection / pre-procedure swab.
No-smear, quick-evaporating formula leaves no visible residue, ideal for glass, stainless steel and monitor screens.
Individually wrapped sachets help prevent wipes from drying out and maintain sterility and efficacy until point of use.
Durable wipe material allows effective coverage of surfaces with a single wipe, improving cost-effectiveness.
Available in a range of wipe sizes and formats across the Clinell Alcohol Wipes range, including large wipes and blue food probe wipes.
Clinell Alcohol Wipes Plus variants include quaternary ammonium compounds for additional antimicrobial protection.
Convenient, portable pack of 100 sachets suitable for clinical areas, trolleys, kits and on-the-go use.
Indications
Rapid disinfection of the surfaces of non-invasive medical devices and equipment, in line with manufacturer guidance.
Pre-injection or pre-procedure skin swabbing where 70% isopropyl alcohol is appropriate and recommended.
Disinfection of hard, non-porous surfaces in healthcare and clinical environments (e.g. trolleys, bed frames, infusion stands).
Cleaning and disinfection of high-touch surfaces, such as computer keyboards, mice, monitor screens, telephones and touch screens, where compatible.
Use as part of infection prevention and control protocols in hospitals, clinics, dental surgeries and community care settings.
Composition
Impregnated solution: approximately 70% v/v isopropyl alcohol (isopropanol).
Purified water: approximately 30% v/v as solvent and diluent.
No added fragrances or dyes; medical grade alcohol formulation.
Formulation
Non-sterile disinfectant wipes saturated with 70% pharmaceutical grade isopropyl alcohol.
Rapid-drying, low-smear alcohol solution designed to evaporate completely and leave no visible residue.
Single-use, individually wrapped sachets to maintain wipe moisture and reduce risk of contamination.
Class IIa medical device formulation for the disinfection of non-invasive medical devices, with proven bactericidal performance.
Alcohol-only formulation; Clinell Alcohol Wipes Plus variants contain additional quaternary ammonium for extended kill spectrum.
Packaging
Box of 100 individually wrapped alcohol wipes (sachets).
Each sachet contains one pre-saturated non-woven wipe.
Commercial ordering code commonly referenced as CASS100 (Alcohol Wipe Sachets 100), with Medisave SKU GCASS100.
Outer carton packaging supports bulk storage and distribution to clinical areas.
Usage
Check that the product is suitable for the intended device or surface and refer to the equipment manufacturer’s cleaning instructions before use.
Tear open an individual sachet, remove the wipe and unfold it fully.
Wipe the surface of the non-invasive medical device, equipment or hard surface, ensuring complete coverage of all required areas.
For pre-injection skin preparation, apply to clean, intact skin and allow the area to be thoroughly wetted by the wipe.
Allow the surface or skin to air dry completely; do not wipe dry, in order to maintain the required contact time for effective disinfection.
Dispose of used wipes and sachets in accordance with local clinical or healthcare waste policies.
Do not flush wipes down the toilet; discard in appropriate waste containers.
For external use only; do not use on broken skin, mucous membranes or on invasive medical devices unless specifically indicated.
Contraindications
Do not use on invasive medical devices or in situations where non-alcohol-based disinfection is specifically required.
Not suitable for use on patients with known hypersensitivity to isopropyl alcohol.
Avoid use on large areas of damaged or broken skin.
Do not use on mucous membranes (e.g. eyes, mouth, genital areas).
Do not use on surfaces that are incompatible with alcohol (e.g. some plastics, acrylics, varnished or painted surfaces) without checking manufacturer guidance.
Adverse Effects
May cause transient skin dryness or irritation, particularly with frequent or prolonged use.
Eye contact with the solution may cause irritation; rinse cautiously with water if this occurs.
Inhalation of high concentrations of vapour in poorly ventilated areas may cause dizziness or respiratory irritation.
In rare cases, allergic contact reactions to isopropyl alcohol or wipe components may occur; discontinue use if signs of hypersensitivity appear.
Storage Conditions
Store in a cool, dry place away from direct sunlight and heat sources.
Keep the box tightly closed and sachets sealed until use to prevent drying out.
Store away from sources of ignition; isopropyl alcohol is highly flammable.
Keep out of reach of children and unauthorised users.
Observe any expiry date printed on the packaging and do not use after the expiry date.
Duration
Single-use application per wipe; effective disinfection is achieved within the contact time defined by EN1276 and EN13727 testing (typically within 30\u201360 seconds of wet contact).
Onset
Rapid onset; bactericidal action begins immediately on contact, with at least 99.999% germ kill demonstrated within the validated contact time.
