Intended and marketed as an environmental cleanliness auditing and training tool, not as a medicinal product or medical device.
Fluorescent marker pens and powder are supported by safety data sheets (SDS) and are labelled in line with applicable chemical safety and CLP requirements in relevant markets.
Use of the system is typically incorporated into local infection Prevention and quality Assurance programmes and should follow organisational policies on environmental cleaning audits.
Intended and marketed as an environmental cleanliness auditing and training tool, not as a medicinal product or medical device.
Fluorescent marker pens and powder are supported by safety data sheets (SDS) and are labelled in line with applicable chemical safety and CLP requirements in relevant markets.
Use of the system is typically incorporated into local infection Prevention and quality Assurance programmes and should follow organisational policies on environmental cleaning audits.
UV torch and electronic components are supplied in accordance with general electrical safety and electromagnetic compatibility requirements applicable in the regions where sold.
Description
Clinell EvaluClean UV Torch Kit (CUV1) is a compact, advanced and customisable system for auditing and improving environmental cleanliness and hand hygiene practice. The kit uses a unique, wipeable fluorescent gel marker and an ultra-strong 28-LED UV torch to show how thoroughly surfaces and equipment have been cleaned. Users mark high-touch surfaces with the fluorescent marker, allow routine cleaning to take place and then use the UV torch to assess whether the invisible marks have been completely removed, giving an objective measure of cleaning quality. The system can be combined with EvaluClean audit software to record sites, schedule checks, and generate detailed reports by hospital, ward, room type or item. EvaluClean fluorescent markers and UV torch have been rigorously tested for wipeability on non-porous hospital surfaces, and fluorescent marker systems have been shown in ICUs to increase the proportion of surfaces cleaned by around 40%, supporting better infection-prevention practice.
Bnefits
Provides a simple, objective and visual way to assess how thoroughly surfaces and equipment are cleaned.
Uses a unique, invisible fluorescent gel that is only visible under UV light, allowing discreet marking of high-touch surfaces.
Fluorescent gel is rigorously tested to remain wipeable from non-porous hospital surfaces when standard cleaning methods are used.
Ultra-strong 28-LED UV torch delivers excellent visibility of fluorescent marks, making assessments quick and reliable.
Marker-based auditing has been shown in intensive care units to increase the proportion of surfaces cleaned by approximately 40%.
Fluorescent marker mimics microbiological contamination more closely than ATP systems, giving a better indication of true cleaning performance.
System is highly flexible and customisable; users choose which surfaces, rooms and items to monitor based on risk.
Works as both an educational tool (for cleaner and staff training) and a formal audit system for environmental hygiene.
EvaluClean audit software (tablet-based) supports real-time data capture, reminders, and powerful reporting by ward, room, item or clean type.
Designed to support continuous quality improvement in infection prevention and can be used alongside any cleaning/disinfection products.
UV torch and electronic components are supplied in accordance with general electrical safety and electromagnetic compatibility requirements applicable in the regions where sold.
Environmental cleanliness auditing kit
Auditing and evaluating the thoroughness of environmental cleaning in hospitals, clinics, and other healthcare facilities.
Monitoring cleaning quality of high-touch surfaces in intensive care units, operating theatres, isolation rooms and general wards.
Assessing effectiveness of cleaning protocols in outpatient, dental, aesthetic and dermatology clinics, including treatment rooms and waiting areas.
Educational demonstrations for cleaners, nursing staff and other healthcare workers on proper wiping techniques and surface coverage.
Hand hygiene and pathogen-transfer demonstrations using the included fluorescent powder during training sessions.
Ongoing quality-assurance programmes where quantitative data on cleaning performance is required for governance and compliance.
Composition
Fluorescent marker pens containing a proprietary, non-toxic fluorescent gel designed to be invisible in normal light and visible under UV light, and to remain wipeable from non-porous hospital surfaces when cleaned according to protocol.
Fluorescent UV powder supplied in a small container for training and demonstration of pathogen transfer (not for routine audit use).
Battery-powered UV torch, typically with 28 LEDs at a specific ultraviolet wavelength optimised for visualising the fluorescent gel and powder (requires 3 x AAA batteries, usually not included).
Carrying case or packaging insert to hold the torch, fluorescent pens and powder.
Access details and documentation for EvaluClean audit software (typically app-based software used on a tablet device, which may be supplied separately or as part of a wider system).
Formulation
Non-disinfectant, audit and training system comprised of fluorescent gel, fluorescent powder and UV torch, with no clinical or therapeutic action.
Fluorescent gel formulation designed for high visibility under UV light, stability on surfaces and removal with standard cleaning practices.
UV torch engineered to emit a focused ultraviolet beam at an appropriate wavelength to excite the fluorescent compounds in the gel and powder.
Software component (EvaluClean audit app) designed to record locations, schedule checks, capture pass/fail results and generate reports.
Packaging
Compact kit (often a small box or case) containing two fluorescent marker pens, one container of fluorescent powder and one 28-LED UV torch.
External product carton or sleeve branded as Clinell EvaluClean UV Torch Kit with product code CUV1 and basic information.
Internal inserts or leaflets providing quick-start instructions, safety information and references to full guidance and software access.
Packaging designed for easy storage in a clinical or training environment and for transport between wards or facilities.
Usage
Before use, read the supplied instructions for use (IFU), auditing toolkit guide and local policies on environmental cleaning and audit.
Select high-touch surfaces or items to audit (e.g. bed rails, monitor controls, door handles, IV pump buttons) based on a local risk assessment.
Using the fluorescent marker pen, apply a small, discreet mark or short line of fluorescent gel on each chosen surface; allow to dry briefly if required.
Record the marked locations using the EvaluClean audit software or a paper audit form, noting room, item, site and date/time of marking.
Allow routine cleaning to take place according to existing cleaning schedules and protocols (do not inform cleaning staff which specific sites are marked, if blinded audit is desired).
At the designated follow-up time, darken the area if possible or reduce ambient light, switch on the 28-LED UV torch and scan each marked surface.
Observe whether the fluorescent mark has been completely removed (pass), partially removed (partial pass) or remains clearly visible (fail) according to your audit criteria.
Enter results into the EvaluClean software or audit form, categorising by ward, room type, item, cleaning type and cleaner ID if required.
Review summary reports and trends generated by the software to identify areas or teams needing feedback, retraining or process improvement.
For training purposes, optionally use a small amount of fluorescent powder on demo surfaces or objects to show how contamination can transfer between surfaces or hands when cleaning or hand hygiene is sub-optimal.
After use, wipe any residual gel or powder from surfaces fully using routine cleaning and disinfection methods, ensuring no visible fluorescence remains when checked again with the UV torch.
Store the kit components (marker pens, powder and torch) in the closed container in a safe location, away from direct sunlight and out of reach of children; switch off the torch after use.
Contraindications
Not for medical treatment, disinfection or direct patient care; it is an audit and training tool only.
Fluorescent gel and powder are not intended for application to mucous membranes, eyes, open wounds or broken skin.
Avoid deliberate application of gel or powder to patient skin except where local policy explicitly permits controlled training demonstrations on intact skin.
Do not use fluorescent powder for routine audits in clinical areas where residual powder may be difficult to remove from crevices or sensitive equipment; it is recommended primarily for training scenarios.
UV torch should not be shone directly into eyes at close range, as prolonged exposure to UV light may cause eye discomfort or irritation.
Users with known sensitivities to any ingredients in the fluorescent gel or powder should minimise direct contact and use appropriate PPE.
Adverse Effects
Brief skin contact with fluorescent gel or powder is generally low risk but may cause mild irritation in susceptible individuals; wash with soap and water if irritation occurs.
Accidental eye exposure to gel, powder or UV light may cause temporary irritation, redness or discomfort; rinse eyes with water and seek medical advice if symptoms persist.
Inhalation of significant quantities of powder dust (e.g. if spilled) may cause transient respiratory irritation; avoid creating dust clouds and clean up spills carefully.
Ingestion of gel or powder is not intended and may cause mild gastrointestinal upset; seek medical advice if swallowed, following guidance in the safety data sheet.
Improper handling or storage of batteries for the UV torch may pose leakage or ingestion hazards; handle batteries in accordance with manufacturer instructions.
Storage Conditions
Store the kit in a cool, dry place away from direct sunlight and sources of heat.
Keep fluorescent pens capped when not in use to prevent drying out and maintain performance.
Ensure fluorescent powder container is tightly closed to minimise the risk of spills and moisture ingress.
Store the UV torch switched off, and remove batteries if the torch will not be used for an extended period to prevent leakage.
Keep the complete kit out of reach of children and unauthorised persons, in accordance with local governance for training and audit materials.
Protect from excessive humidity and contamination to preserve fluorescent performance and readability under UV light.
Duration
Not a therapeutic treatment; used as part of individual cleaning audits and ongoing audit programmes. Each audit cycle typically covers one cleaning episode (e.g. daily or terminal clean), with frequency and duration determined by local infection-prevention and quality-improvement policies.
Onset
Auditing capability is immediate once surfaces are marked and routine cleaning has occurred; the fluorescent gel is visible under UV light as soon as it is applied and persists until effectively removed by cleaning.
