JBP Nano Cannula 30G x 25mm

JBP

Medical devices & consumables

Blunt-tip microcannulas for aesthetic injection procedures

CE Marked sterile single Use medical device for use within the EU/EEA and UK markets, as indicated on distributor labelling
Manufactured under a medical device quality management system compliant with applicable regulations for Class II medical devices (e.g. ISO Based QMS requirements for CE marking)
Gamma Irradiated sterilisation (typically 25–40 kGy) as specified by some distributors for JBP Nano Cannulas
Conforms to relevant needles and cannulas safety and performance standards for aesthetic medical devices marketed in Europe

CE Marked sterile single Use medical device for use within the EU/EEA and UK markets, as indicated on distributor labelling
Manufactured under a medical device quality management system compliant with applicable regulations for Class II medical devices (e.g. ISO Based QMS requirements for CE marking)
Gamma Irradiated sterilisation (typically 25–40 kGy) as specified by some distributors for JBP Nano Cannulas
Conforms to relevant needles and cannulas safety and performance standards for aesthetic medical devices marketed in Europe

Blunt-tip microcannulas for aesthetic injection procedures

Description

JBP Nano Cannula 30G x 25mm is an ultra-thin walled, blunt-tip microcannula from Japan Bio Products designed specifically for high-precision aesthetic injection procedures. With a 30G outer diameter and 25 mm length, the cannula combines a thin wall and wide inner bore to allow low-resistance injection of fillers and other injectable solutions, while its flexible shaft and micro-polished side port minimise trauma to hypodermal tissues. The device is intended to reduce bruising, swelling and downtime compared with conventional sharp needles, and is supplied sterile with a corresponding sharp introducer (punching) needle.

Bnefits

Ultra-thin walled 30G cannula with wide inner diameter for smooth, low-resistance injection
Blunt-tip design to help reduce the risk of vascular injury and soft-tissue trauma compared with sharp needles
Micro-polished cannula port manufactured with special technology for smoother tissue penetration and reduced friction
Designed to reduce damage to hypodermal tissues, resulting in less downtime and less internal bleeding
High flexibility of the cannula shaft to navigate tissue planes and cover wider areas from fewer entry points
Improved patient comfort with less pain during treatment when used with appropriate technique
Sterile single-use device supplied with a matching sharp punching needle in each blister
Suitable for delicate aesthetic areas where fine-gauge, precise delivery is required

Indications

Use as a blunt-tip microcannula for injection of dermal fillers (e.g. hyaluronic acid-based fillers) in aesthetic procedures
Facial volumisation and contouring in appropriate anatomical planes, including cheeks, nasolabial folds, marionette lines and jawline, as clinically indicated
Fine, superficial aesthetic treatments in delicate areas where a 30G, 25 mm cannula is suitable according to practitioner judgement
Other minimally invasive aesthetic or dermatological injection procedures where a sterile, single-use 30G blunt cannula is indicated and within the practitioner’s scope of practice

Composition

Cannula shaft: medical-grade stainless steel, ultra-thin walled tubing (30G)
Cannula tip: blunt tip with micro-polished side port opening
Introducer (punching) needle: sharp stainless steel needle supplied in the same blister for creating the entry point
Hub: luer-lock compatible plastic hub for secure connection to standard syringes
Packaging materials: sterile blister pack and labelled outer carton

Formulation

Gauge: 30G (outer diameter approximately 0.30 mm)
Length: 25 mm
Ultra-thin wall design with enlarged inner diameter to allow easier flow of viscous fillers through a fine gauge
Blunt-tip microcannula with side-port injection opening, finished using micro-polishing technology
Flexible shaft to facilitate fanning and threading techniques from a limited number of entry points
Each sterile unit supplied as a set including 1 Nano Cannula and 1 sharp punching needle
Typically supplied as 24 pieces per box for professional clinic use; some distributors also offer packs of 4 or single cannulas

Packaging

Primary packaging: individual sterile blister pack containing one 30G x 25 mm JBP Nano Cannula and one matching sharp punching needle
Secondary packaging: carton/box containing 24 sterile blister packs (24 cannulas + 24 punching needles) for clinic use
Some distributors may offer repackaged quantities (e.g. pack of 4 cannulas) clearly labelled for professional use
Outer packaging labelled with gauge, length, lot number, expiry date, CE mark, manufacturer and country of origin

Usage

For professional use only by appropriately trained and qualified healthcare practitioners experienced in aesthetic injection techniques.
Verify the integrity of the sterile blister and check the expiry date before use; do not use if the package is damaged or expired.
Prepare the treatment area following standard aseptic protocol.
Use the supplied sharp punching needle to create a small entry point in the skin at the selected access site.
Attach the JBP Nano Cannula 30G x 25mm securely to a luer-lock syringe prefilled with the chosen dermal filler or injectable solution.
Insert the blunt cannula tip gently through the entry point and advance along the appropriate anatomical plane with minimal force, following the planned injection pattern.
Inject the product slowly and with controlled pressure; the thin wall and wide inner diameter are designed to reduce injection resistance.
After completing the treatment, carefully withdraw the cannula and apply light pressure if necessary to minimise bruising.
Dispose of the used cannula and punching needle immediately as sharps in accordance with local clinical waste regulations; the device is single-use and must not be resterilised or reused.

Contraindications

Do not use in patients with known hypersensitivity or allergy to stainless steel or any material in the device.
Do not use on or through areas of active skin infection, inflammation, or disease at the intended entry or treatment site.
Not suitable for applications requiring cutting or incising of tissue; the device is a blunt-tip cannula intended only for injection in tissue planes.
Do not use if sterility is compromised, packaging is damaged, or the product is past the marked expiry date.
Use of the cannula is also contraindicated when the injectable product being administered is itself contraindicated for the patient or treatment area.

Adverse Effects

Common injection-site reactions such as transient pain or discomfort at the entry point.
Local bruising, swelling, erythema or tenderness at or around the injection site.
Haematoma formation or vascular compromise may rarely occur, particularly if injection technique or anatomical plane selection is inappropriate.
Infection at the injection site if aseptic technique is not followed.
Mechanical issues such as bending or kinking of the cannula if excessive force is applied; a damaged cannula should be discarded and replaced.

Storage Conditions

Store in a clean, dry place at approximately 15–30 °C in the original sealed packaging.
Protect from direct sunlight, excessive heat, moisture and mechanical stress.
Do not freeze or subject the product to extreme temperatures or crushing loads that could deform the cannulas or blisters.
Keep in sterile blister and unopened carton until required for use, and observe the stated expiration date (shelf life typically up to 36 months from sterilisation).

Duration

Not directly applicable to the device; JBP Nano Cannula 30G x 25mm is a single-use instrument employed during individual aesthetic treatment sessions.

Onset

Not directly applicable to the device; reduced bruising, swelling and discomfort may be observed immediately compared with sharp-needle techniques, while overall treatment results depend on the injected product and clinical protocol.