70% isopropyl alcohol surface and hand sanitising wipes
Certifications
Formulated and classified in accordance with Regulation (EC) No. 1272/2008 (CLP) for flammable liquids and eye irritation hazards, as detailed in Medisanitize Alcohol Wipes Safety Data Sheets.
Safety Data Sheets prepared in line with REACH and EU/UK regulations for hazardous mixtures, covering Medisanitize alcohol and sanitising wet wipes.
Product marketed as a biocidal/disinfectant wipe for surfaces and hand sanitising rather than as a medicinal product or medical device.
Formulated and classified in accordance with Regulation (EC) No. 1272/2008 (CLP) for flammable liquids and eye irritation hazards, as detailed in Medisanitize Alcohol Wipes Safety Data Sheets.
Safety Data Sheets prepared in line with REACH and EU/UK regulations for hazardous mixtures, covering Medisanitize alcohol and sanitising wet wipes.
Product marketed as a biocidal/disinfectant wipe for surfaces and hand sanitising rather than as a medicinal product or medical device.
Manufacturer quality and safety management aligned with requirements for production and supply of flammable disinfectant wipes in the EU/UK market.
Description
Pack of 200 Medisanitize 70% Alcohol Wipes are single-use nonwoven wipes pre-saturated with a 70% isopropyl alcohol (IPA) solution for rapid disinfection of hands and non–alcohol-sensitive hard surfaces. Supplied in a convenient flow-pack format, these antibacterial wipes are designed for quick, effective cleaning and sanitising in healthcare, aesthetics, office, and home environments. The 70% IPA formula kills 99.99% of common germs and bacteria, providing convenient on-the-go infection control at a low per-wipe cost.
Bnefits
Pre-saturated with 70% isopropyl alcohol, an effective concentration for rapid disinfection of many surface microorganisms.
Antibacterial wipes suitable for surface cleaning and hand sanitising when skin is intact and alcohol-tolerant.
Quick, convenient and effective – ready to use straight from the pack with no need to measure liquids or use additional cloths.
Single-use wipes reduce the risk of cross-contamination compared with reusable cloths.
Designed for both cleaning and disinfection of hands and non–alcohol-sensitive hard surfaces (2-in-1 use).
70% IPA formulation kills 99.99% of bacteria and germs quickly, helping to reduce the transmission of pathogens such as MRSA, Listeria, Salmonella and E. coli.
Packed and sealed to retain moisture for longer shelf life and consistent wetness of wipes.
From the Medisanitize infection control range, allowing coordinated use with 70% IPA sprays and other surface disinfection products.
Compact pack of 200 wipes offers good value and is easy to store in clinics, treatment rooms, and reception areas.
Compatible with typical infection-control protocols for rapid surface decontamination between patients or procedures.
Indications
Intended for rapid cleaning and disinfection of non–alcohol-sensitive hard surfaces in healthcare, aesthetic, office and domestic environments.
Suitable for sanitising frequently touched surfaces such as worktops, treatment couches (if alcohol-compatible), trolleys, door handles, telephones, keyboards and equipment casings.
Can be used for hygienic hand sanitising on intact, healthy skin when soap and water are not readily available, if the user tolerates alcohol formulations.
Manufacturer quality and safety management aligned with requirements for production and supply of flammable disinfectant wipes in the EU/UK market.
70% isopropyl alcohol surface and hand sanitising wipes
Recommended for disinfection of non-invasive instruments and equipment where 70% IPA is appropriate and manufacturer guidance permits.
Useful in clinical settings (e.g. GP surgeries, dental practices, aesthetic clinics, podiatry, tattoo and piercing studios) as part of routine infection control.
Composition
Active solution: approximately 70% v/v isopropyl alcohol (IPA) as the primary biocidal agent.
Balance of solution (~30%) typically purified water and minor formulation aids (e.g. humectants and solubilisers) as detailed in the Medisanitize Alcohol Wipes Safety Data Sheet.
Nonwoven wipe substrate: white nonwoven fabric acting as the carrier for the 70% IPA solution.
No added fragrances or colourants are typically indicated for this medical/office infection-control format.
Formulation
White nonwoven fabric wipes pre-saturated with a 70% isopropyl alcohol (IPA) aqueous solution.
70% IPA formulation chosen for optimal antimicrobial efficacy while allowing rapid evaporation from surfaces.
Single-use, ready-to-use wipes designed for topical application to surfaces and hands (on intact skin).
Non-sterile disinfectant wipes intended for general infection-control use rather than sterile prep of critical sites.
Formulated as a fast-evaporating, low-residue solution to minimise streaking and drying time on compatible surfaces.
Wipes are packed and sealed (often in foil/aluminium-type laminate or high-barrier plastic) to maintain moisture and alcohol content during shelf life.
Resealable opening or plastic cap-lock system on the flow pack to reduce evaporation between uses and keep wipes moist.
External labelling includes product name, wipe count (200), 70% alcohol content, hazard icons for flammable liquids, usage directions and manufacturer/supplier details.
Supplied by Medisave UK under SKU EXMDZ0019/SINGLE, classified within Infection Control / Surface Sanitising Wipes.
Usage
Open the pack at the designated resealable opening or plastic cap and remove a single wipe.
Ensure the pack is resealed immediately after removing a wipe to minimise evaporation and prevent the remaining wipes from drying out.
For surfaces: thoroughly wipe the area to be cleaned and disinfected, ensuring full coverage with the pre-saturated wipe.
Allow the surface to air dry completely; do not wipe dry with a separate cloth, as a defined contact time is needed for disinfection (typically a few tens of seconds to a few minutes, depending on local protocol).
For hands (on intact skin): wipe all surfaces of the hands and fingers with the wipe, ensuring full coverage; allow hands to air dry and avoid rinsing off the product.
Use each wipe only once and discard after use; do not return used wipes to the pack.
Avoid contact with eyes and mucous membranes. In case of eye contact, rinse cautiously with water for several minutes and seek medical advice if irritation persists.
Do not use on broken or irritated skin or in individuals with known sensitivity to isopropyl alcohol or other components.
Keep away from open flames, heat sources and sparks – the wipes and vapours are highly flammable due to the 70% alcohol content.
Dispose of used wipes and empty packaging in accordance with local regulations; do not flush wipes down toilets.
Contraindications
Known hypersensitivity or allergy to isopropyl alcohol (IPA) or any other components of the formulation.
Use on broken, damaged or diseased skin, where high-strength alcohol may cause irritation or stinging.
Use on alcohol-sensitive surfaces or materials (e.g. some plastics, painted, lacquered or varnished surfaces, acrylic screens, certain rubberised finishes) where alcohol may cause damage, crazing or discolouration.
Use near open flames, hot surfaces, sparks or other ignition sources due to the high flammability of the 70% alcohol solution.
Prolonged or repeated use on sensitive skin areas, especially in people with dermatitis or very dry skin.
Use in enclosed or poorly ventilated areas without adequate ventilation where vapour build-up could cause irritation or dizziness.
Adverse Effects
Eye irritation and possible serious eye damage if the alcohol solution comes into direct contact with the eyes.
Skin dryness, irritation or redness with frequent or prolonged use on the hands or other skin areas.
Respiratory irritation, drowsiness or dizziness due to inhalation of high concentrations of isopropyl alcohol vapour in poorly ventilated spaces.
Local irritation or discomfort on sensitive or compromised skin.
In the event of accidental ingestion, irritation of the gastrointestinal tract and systemic effects associated with isopropyl alcohol may occur; seek urgent medical advice.
As with all flammable alcohol products, misuse or use close to ignition sources can lead to fire or burns.
Storage Conditions
Store in a cool, well-ventilated place away from direct sunlight and sources of heat, sparks or open flame.
Keep the pack tightly closed or properly resealed when not in use to prevent evaporation of alcohol and drying of wipes.
Store at normal room temperatures as indicated on the packaging; avoid high temperatures that may increase vapour pressure and fire risk.
Keep out of the sight and reach of children.
Do not smoke near the product and do not store with strong oxidising agents or incompatible chemicals.
Dispose of empty packaging and expired product in accordance with local regulations for flammable and chemical waste.
Duration
Not applicable \u2013 each wipe is intended for single-use cleaning and disinfection; disinfection occurs over the contact time while the surface remains wet with the 70% IPA solution.
Onset
Rapid; 70% isopropyl alcohol begins to act on microorganisms within seconds, with typical disinfection claimed as killing 99.99% of bacteria and germs after short contact times when used as directed.
