Sani cloth 50 wipes Canister for Hard Surface 200x200mm EOL

PDI Sani-Cloth

Infection Control

Chlorine hard surface disinfectant wipes

Formulated and marketed as a chlorine Based sporicidal hard surface and medical device wipe with broad Spectrum efficacy, including spores, when used as directed.
Tested to relevant European standards for disinfectant efficacy (e.g. EN bactericidal, virucidal and sporicidal test methods such as EN 1276, EN 13727, EN 13697, EN 14476, EN 13704 or equivalent, according to PDI product literature).

Formulated and marketed as a chlorine Based sporicidal hard surface and medical device wipe with broad Spectrum efficacy, including spores, when used as directed.
Tested to relevant European standards for disinfectant efficacy (e.g. EN bactericidal, virucidal and sporicidal test methods such as EN 1276, EN 13727, EN 13697, EN 14476, EN 13704 or equivalent, according to PDI product literature).

Chlorine hard surface disinfectant wipes

Description

Sani cloth 50 wipes Canister for Hard Surface 200x200mm EOL are PDI Sani-Cloth Chlor low-lint chlorine hard surface wipes supplied in a convenient canister of 50 wipes. Each wipe measures approximately 200 x 200 mm and is impregnated with a stable chlorine solution based on sodium hypochlorite, providing a sporicidal disinfectant action. The wipes are designed for cleaning and disinfecting hard surfaces and certain non-invasive medical devices in clinical environments, offering broad-spectrum efficacy including spores in as little as 1 minute when used as directed.

Bnefits

Ready-to-use chlorine sporicidal wipes – no diluting or mixing required.
Based on >5400 ppm available chlorine (sodium hypochlorite) for broad-spectrum disinfection including spores.
Low-lint wipe material suitable for hard surfaces and compatible medical devices.
Fast contact times, with effective sporicidal activity in approximately 1 minute when used correctly.
Canister format with 50 wipes and 200 x 200 mm wipe size for convenient dispensing and good surface coverage.
Designed for use in healthcare and infection-control settings to help reduce the risk of healthcare-associated infections.

Indications

Cleaning and disinfection of hard, non-porous environmental surfaces in healthcare and institutional settings.
Disinfection of certain non-invasive medical devices compatible with chlorine-based disinfectants (following manufacturer guidance).
Situations requiring sporicidal disinfection, including environments at risk of contamination with spore-forming organisms such as Clostridioides difficile (when used according to instructions and relevant guidelines).

Composition

Impregnating solution active ingredient: >5400 ppm sodium hypochlorite (available chlorine).
<1% anionic surfactants (detergent) in the impregnating solution.
Low-lint non-woven wipe substrate.

Formulation

Pre-impregnated low-lint non-woven wipes containing a stabilized aqueous sodium hypochlorite solution with surfactant, supplied in a resealable plastic canister.

Packaging

Canister containing 50 pre-impregnated wipes.
Approximate wipe dimensions: 200 x 200 mm.
Approximate canister weight: 400 g.

Usage

Check that the product is within its expiry date and the canister seal is intact before first use.
Open the canister, pull the first wipe through the dispensing aperture and reseal the lid after dispensing to prevent drying.
Use a fresh wipe to thoroughly wet the surface, ensuring complete coverage; pay particular attention to high-touch areas.
Allow the surface to remain visibly wet for the recommended contact time (typically at least 1 minute for sporicidal activity, or as per local policy and product labelling).
Dispose of used wipes as clinical or domestic waste in accordance with local regulations; do not flush wipes.
Do not rinse the surface unless specifically required by device manufacturer guidance.
Wash hands or use appropriate hand hygiene procedures after completing cleaning and disinfection.
Always follow local infection-control policies and any additional instructions on the canister label.

Contraindications

Not for use on skin, open wounds or mucous membranes.
Not suitable for ingestion or use as a hand or body wipe.
Avoid use on surfaces or medical devices that are incompatible with chlorine or sodium hypochlorite (e.g. some metals, textiles, soft furnishings, or electronics) without confirming compatibility.
Do not mix with other cleaning agents, especially acids or ammonia-based products, as this may release hazardous chlorine gas.
Do not use if wipes appear dry or the canister seal has been compromised prior to first use.

Adverse Effects

Prolonged or repeated contact with solution may cause skin irritation or dryness; gloves are recommended for frequent use.
Eye contact with solution may cause irritation and should be avoided; rinse thoroughly with water if accidental contact occurs.
Inhalation of vapours or aerosols generated from misuse (e.g. mixing with other chemicals) may cause respiratory irritation.
May cause fading, corrosion or damage to incompatible materials or surfaces if used contrary to manufacturer advice.

Storage Conditions

Store in a cool, dry place away from direct sunlight and sources of heat.
Keep canister tightly closed when not in use to prevent wipes from drying out and to maintain product stability.
Store in the original container and upright to avoid leakage.
Do not store near acids, ammonia-based products or other incompatible chemicals.
Use within the period recommended on the label after opening (often within approximately one month) and before the printed expiry date.