Harvey Elite and DLX Name Plate
Welch Allyn
Diagnostic & Monitoring AccessoriesStethoscope Name Tag / Name Plate
Certifications
Stethoscope Name Tag / Name Plate
Description
The Welch Allyn Harvey Elite and DLX Name Plate (5079-108) is a lightweight identification tag designed to attach to the tubing of Harvey Elite and Harvey DLX stethoscopes, allowing quick personalisation and helping to prevent loss or mix-ups in busy clinical environments.
Bnefits
- Provides a dedicated space to write the user’s name or ID, helping to clearly identify Harvey Elite and DLX stethoscopes.
- Reduces risk of stethoscope loss or confusion between clinicians in shared clinical settings.
- Designed specifically to fit the tubing of Welch Allyn Harvey Elite and Harvey DLX stethoscopes.
- Lightweight and unobtrusive, adding minimal extra weight to the stethoscope.
- Simple attachment method for quick installation and removal as needed.
- Non-invasive accessory that does not affect the acoustic performance of the stethoscope.
Indications
- Identification of Welch Allyn Harvey Elite and Harvey DLX stethoscopes in hospitals, clinics and teaching environments.
- Personalisation of stethoscopes used by multiple staff in the same department or practice.
- Reducing the likelihood of accidental exchanges of stethoscopes between healthcare professionals.
- Supporting asset control and loss prevention for high-value cardiology stethoscopes.
Composition
- Lightweight, durable polymer name plate body (specific polymer type not specified by manufacturer).
- Integrated opening or strap design for attachment to stethoscope tubing.
- Writable surface or label area for user identification details.
Formulation
- Accessory type: non-sterile stethoscope name tag / name plate.
- Compatibility: Welch Allyn Harvey Elite and Harvey DLX stethoscopes.
- Colour: black (as supplied by commonly listed distributors).
- Packaging unit: 1 name plate per sales unit.
- Intended for re-use on a single stethoscope with proper care.
Packaging
- Supplied as a single Harvey Elite and DLX Name Plate (5079-108) per unit.
- Packed by the manufacturer or distributor in a small protective pack or bag suitable for transport and storage; may be supplied with basic product identification labelling.
Usage
- Remove the name plate from its packaging and inspect for any visible damage before use.
- Identify a suitable position on the tubing of the Harvey Elite or Harvey DLX stethoscope, typically near the headset or upper tubing section, where the plate will not interfere with routine handling.
- Attach the name plate around the stethoscope tubing using the integrated clip, opening, or strap mechanism, ensuring it is secure but not excessively tight on the tubing.
- Write the desired identification information (e.g., user’s name, department, contact detail) on the designated writable area or label of the name plate using an appropriate permanent marker or pen.
- Allow any ink used to dry fully before placing the stethoscope back into pockets or cases to avoid smudging.
- Periodically check that the name plate remains securely attached and that identification markings are still legible; replace if damaged or if information needs updating.
- Clean the name plate in line with local infection-control policies—typically by wiping with an approved disinfectant compatible with stethoscope accessories; avoid aggressive solvents that may damage the plastic.
Contraindications
- No specific clinical contraindications are stated for use as a non-patient-contact accessory.
- Do not use on devices or tubing types other than those compatible if attachment causes deformation or damage.
- Users with known sensitivities to certain plastics or marker inks should avoid direct, prolonged skin contact with the plate or use compatible materials.
- Do not rely on the name plate as a security device; it is intended only for visual identification.
Adverse Effects
- No significant adverse effects are expected when used as intended.
- Prolonged attachment in the same position may leave minor cosmetic marks or impressions on the stethoscope tubing.
- Use of incompatible cleaning agents or solvents may cause discoloration or degradation of the name plate material.
- If damaged edges develop, they may snag on clothing or other objects and the plate should be replaced.
Storage Conditions
- Store in a clean, dry place at normal room temperature when not attached to a stethoscope.
- Avoid prolonged exposure to excessive heat, direct sunlight or extreme cold that could warp or weaken the plastic.
- Keep away from strong solvents, oils or chemicals that may degrade the material or erase written identification.
- If stored separately before use, keep in original packaging or a small container to prevent loss or damage.
Duration
Not applicable; this is a reusable identification accessory intended for continuous use on the stethoscope for as long as needed.
Onset
Immediate identification benefit as soon as the plate is attached to the stethoscope and labelled.
