Logo
Newly Refurbished Cutera truSculpt® flex Muscle Toning Device

Newly Refurbished Cutera truSculpt® flex Muscle Toning Device

Cutera

Body contouring device
  • Marketed as a professional medical Aesthetic device with CE marking for use in applicable European and UK markets, subject to conformity assessment under relevant medical device regulations.
  • Designed and manufactured by Cutera, Inc., which operates under quality Management systems aligned with international medical device standards (such as ISO 13485) and applicable regulatory requirements in its target markets.
  • TruSculpt flex / truFlex indications, safety and performance characteristics are documented in the official Cutera operator manual and supporting clinical/technical literature referenced by the manufacturer.
  • Use, refurbishment and resale of the device must comply with local regulations governing powered muscle stimulators and medical electrical equipment, including requirements for maintenance, electrical safety testing and documentation.
Non-invasive electrical muscle stimulation (EMS) muscle sculpting system

Description

The Cutera truSculpt® flex (now often branded as truFlex®) is a non-invasive, multi-channel muscle sculpting device that uses proprietary Multi-Directional Stimulation (MDS) technology to strengthen, tone and firm skeletal muscles. It delivers direct electrical muscle stimulation through adhesive or strapped handpieces to induce deep, controlled contractions that replicate and intensify common workouts such as crunches, squats and twisting motions. Indicated for improvement of abdominal tone and strengthening, toning and firming of the abdomen, buttocks and thighs, truSculpt flex can treat up to eight areas in a single session and is clinically shown to increase muscle mass by around 30% on average when used in a standard treatment protocol. The unit referenced here is a newly refurbished system offered for resale, typically including the main console, power supply, handpieces and accessories, reconditioned and tested to manufacturer or reseller standards for use in aesthetic and dermatology clinics.

Bnefits

  • Non-invasive muscle sculpting technology that strengthens, tones and firms targeted muscle groups of the abdomen, buttocks and thighs without surgery.
  • Uses Cutera’s proprietary Multi-Directional Stimulation (MDS) to deliver three distinct treatment modes that simulate warm-up, strength-building and high-intensity sculpting workouts.
  • Capable of treating up to eight muscle areas simultaneously in a single session, allowing high throughput and efficient practice workflow.
  • Customisable treatment parameters enable tailoring to each patient’s fitness level, body shape and aesthetic goals.
  • Clinically demonstrated average increases in muscle mass (around 30% hypertrophy in published data) after standard treatment protocols.
  • Comfortable, office-based procedure with no required downtime; most patients resume normal activities immediately after treatment.
  • Refurbished system offers access to premium muscle-toning technology at reduced capital cost while retaining the underlying performance and indications of the original device.
  • Integrates well into broader body-contouring programs, complementing fat-reduction technologies (e.g., truSculpt iD or other modalities) to enhance overall body shape and definition.

Indications

  • Improvement of abdominal tone, strengthening of abdominal muscles and development of a firmer abdomen.
  • Strengthening, toning and firming of buttocks and thighs.
  • Non-invasive muscle sculpting to enhance muscle definition and contour in appropriate candidates who are near or at their ideal body weight but desire improved tone.
  • Adjunct to diet and exercise in individuals who have reached a plateau in muscle development or have limited time for intensive workouts.
  • Part of comprehensive body-contouring protocols in medical aesthetic and dermatology practices when used in accordance with the device’s cleared indications for use.

Composition

  • Console housing the truSculpt flex / truFlex electronic control system and user interface.
  • Multiple output channels delivering direct electrical muscle stimulation for up to eight treatment areas in a single session.
  • Specially designed handpieces / paddles with integrated electrodes that are applied to the skin over target muscle groups, used with a conductive medium (e.g., truGel or equivalent).
  • Internal firmware and software implementing Multi-Directional Stimulation (MDS) algorithms and three primary treatment modes (Prep, Tone, Sculpt).
  • Power supply rated approximately 100–240 VAC, 50/60 Hz, with console power consumption around 75 VA as per Cutera technical documentation.
  • Cables, straps and accessory kits to secure handpieces and connect them safely to the console.
  • Wheeled or static cart / pedestal (depending on configuration) for stable placement in treatment rooms.

Formulation

  • Capital medical-aesthetic device classed as an electrical muscle stimulator using direct electrical current delivered through external electrodes.
  • Multi-channel EMS platform incorporating Cutera’s Multi-Directional Stimulation (MDS) technology to vary frequency, intensity and pattern of contractions during treatment.
  • Three programmable treatment modes: Prep mode (warm-up and stretching), Tone mode (sustained contractions for strength and endurance) and Sculpt mode (rapid, deep contractions for hypertrophy and definition).
  • Non-invasive, surface-applied technology; no needles or implants and no radiofrequency heating in the muscle-stimulation component itself (distinct from truSculpt iD adipose RF platform).
  • Console and handpieces are non-sterile reusable components; electrode pads and gels are consumables to be used, cleaned or disposed in line with manufacturer’s instructions.

Packaging

  • Refurbished system typically supplied as a complete functional unit including: truSculpt flex console, power cords, handpieces / paddles, connection leads and straps (specific inclusions depend on reseller and refurbishment package).
  • May be delivered on an original or compatible cart / stand designed to support the console and manage cable routing.
  • Accompanied by an operator manual (printed or electronic), basic accessories and, where available, start-up kit of consumables (electrode pads, conductive gel) as defined by the reseller.
  • Refurbished packaging will often differ from new factory packaging, but the device retains original manufacturer labels, serial numbers, identification plates and regulatory marks (including CE mark where applicable).

Usage

  • truSculpt flex must be operated only by trained and appropriately licensed healthcare professionals or clinic staff under medical supervision, in accordance with the official Cutera operator manual and local regulations.
  • Before first use, ensure the refurbished unit has been installed, safety-checked and, if applicable, serviced or calibrated according to manufacturer and reseller recommendations.
  • Perform a full medical history and assessment to confirm suitability (including fitness level, presence of implanted electronic devices, cardiac conditions and other contraindications).
  • Identify treatment areas (e.g., abdomen, buttocks, thighs) and determine the number and placement of handpieces required to properly cover the target muscles.
  • Apply a suitable conductive medium and secure handpieces over the treatment areas using straps or other manufacturer-approved methods, ensuring full contact between electrodes and skin.
  • Select or program the appropriate treatment mode(s) (Prep, Tone, Sculpt) and session parameters in line with the patient’s fitness level, goals and the operator manual.
  • Gradually increase intensity during the session to a level that produces strong but tolerable muscle contractions; monitor the patient’s comfort and physiological response throughout.
  • Typical session durations range from about 15 to 45 minutes, depending on the protocol and number of areas treated; up to eight regions may be stimulated simultaneously.
  • After the session, remove handpieces, clean the treated skin and inspect the area for any unexpected reactions; provide post-treatment guidance (e.g., possible muscle soreness similar to an intense workout).
  • Clean and disinfect handpieces and non-disposable components using methods compatible with the device materials and consistent with manufacturer instructions; replace consumables as required.
  • Advise patients on a course of treatment, often comprising a series of multiple sessions over several weeks, and emphasise that truSculpt flex complements rather than replaces healthy diet and physical activity.

Contraindications

  • Presence of implanted electronic devices such as pacemakers, implantable cardioverter-defibrillators (ICDs) or neurostimulators, due to the risk of interference from electrical muscle stimulation.
  • Pregnancy or suspected pregnancy, as the safety of truSculpt flex during pregnancy has not been established.
  • Known or suspected malignant or benign tumours in or near the intended treatment area unless cleared by the appropriate specialist.
  • Significant cardiac conditions, uncontrolled arrhythmias or other serious systemic illnesses where increased heart rate and strong muscle contractions may pose risk.
  • Active infection, open wounds, severe dermatitis or other acute inflammatory skin conditions at the planned treatment sites.
  • Known bleeding disorders or use of certain anticoagulant/antiplatelet medications that could increase the risk of bruising or hematoma, unless carefully assessed by the treating physician.
  • Metallic or other implanted devices directly underneath or very close to the treatment area (e.g., certain orthopaedic hardware), unless allowed by the manufacturer and clinician after risk assessment.
  • Severe peripheral vascular disease, sensory impairment or conditions that reduce the patient’s ability to perceive or report discomfort in the treatment region.
  • Any other contraindications, warnings or limitations described in the official truSculpt flex / truFlex operator manual and applicable local device-usage and safety regulations.

Adverse Effects

  • Transient muscle soreness or fatigue in the treated areas, similar to that experienced after an intense workout, lasting up to several days.
  • Mild to moderate discomfort or pain during treatment due to strong muscle contractions, particularly as intensity is increased.
  • Local skin reactions under or around the electrodes such as redness, warmth, tingling, itching or temporary skin irritation or hypersensitivity.
  • Bruising in the treatment area, particularly in patients prone to bruising or with fragile capillaries.
  • Rarely, burns or significant skin injury beneath or near electrodes if application, contact, intensity or monitoring are inadequate or if conductive medium is not used correctly.
  • Random or continued muscle twitching for a short period after treatment as muscles relax.
  • Very rare risk of allergic skin reaction to gels, adhesives or electrode materials used during the procedure.
  • Any serious, unexpected or persistent adverse events should lead to immediate cessation of treatment and prompt clinical evaluation, and must be reported through appropriate medical device vigilance channels in accordance with local regulations.

Storage Conditions

  • Install and operate the console in a clean, dry treatment room environment, typically within normal clinical ambient temperature and humidity ranges specified in the operator manual (for example, around 10–30°C with non-condensing humidity).
  • Avoid exposing the device to excessive heat, cold, moisture or direct sunlight, and do not store or operate the system in locations with risk of liquid spills or corrosive atmospheres.
  • Ensure adequate ventilation around the console and do not block any vents or cooling fans.
  • Store handpieces, cables and accessories neatly to avoid kinking, crushing or other physical damage; keep electrode surfaces clean and free from residue when not in use.
  • Disconnect the unit from mains power when performing cleaning or when the system will not be used for an extended period, following manufacturer guidelines.
  • Keep the device and all accessories out of reach of unauthorised personnel, children and non-clinical staff; use only in professional settings.
  • For long-term storage or shipping, follow Cutera and/or reseller instructions for packaging, securing moving parts and protecting sensitive components from impact and electrostatic discharge.

Duration

Standard clinical protocols commonly involve a series of approximately 4\u20136 truSculpt flex sessions performed over 2\u20133 weeks (for example, two to three sessions per week), with each treatment lasting around 15\u201345 minutes depending on the number of areas treated and practice preferences. Initial muscle tone and strength improvements may be seen after completing the first treatment series, with providers often recommending periodic maintenance sessions (e.g., every 1\u20133 months) to sustain results, similar to an ongoing fitness program.

Onset

Many patients report feeling stronger contractions and local muscle fatigue immediately after each session, with visible improvements in tone and contour typically emerging within several weeks. Clinical practices commonly note that the most pronounced changes in definition and muscle hypertrophy are seen around 8\u201312 weeks after the final session in a treatment series, provided that the patient maintains a stable weight and healthy lifestyle during that period.

Browse more Body contouring device

Top Treatments

Top Cities in the UK