Plinth 2000 Foot Cap 1.5\ Square
Plinth Medical
Medical furniture accessoryFoot cap / levelling foot for treatment couches
Certifications
- Manufactured by Plinth Medical as part of the Plinth 2000 couch accessories and spare parts range, produced under controlled quality systems for medical furniture.
- Distributed in the UK by Medisave UK Ltd, an MHRA Registered wholesale dealer operating ISO 9001 quality and ISO 14001 environmental management systems.
- Supplied as a furniture accessory/spare part rather than a standalone regulated medical device.
- Manufactured by Plinth Medical as part of the Plinth 2000 couch accessories and spare parts range, produced under controlled quality systems for medical furniture.
- Distributed in the UK by Medisave UK Ltd, an MHRA Registered wholesale dealer operating ISO 9001 quality and ISO 14001 environmental management systems.
- Supplied as a furniture accessory/spare part rather than a standalone regulated medical device.
Foot cap / levelling foot for treatment couches
Description
The Plinth 2000 Foot Cap 1.5\ Square is a replacement foot component designed for use on compatible Plinth 2000 couches and associated Plinth Medical furniture that utilise 1.5 inch square leg or frame posts. It fits to the base of the couch leg to provide a protective and stable foot surface, helping to protect floors, reduce noise and vibration when moving or adjusting the couch, and maintain a neat, finished appearance at the base of the frame.
Bnefits
- Provides a stable foot surface for 1.5" square couch legs, helping maintain couch stability on suitable floors.
- Protects floor surfaces from direct contact with metal leg ends, reducing the risk of scratching or marking.
- Helps to minimise noise and vibration when repositioning or adjusting the couch.
- Restores a neat, professional finish to the base of Plinth 2000 couches where original feet are worn or missing.
- Simple replacement spare part that supports refurbishment and extends the service life of compatible couches.
Indications
- Replacement of worn, damaged or missing foot caps on Plinth 2000 couches that use 1.5" square leg or frame posts.
- Routine maintenance and refurbishment of Plinth Medical couches in clinical environments.
- Improving protection of floor surfaces beneath compatible Plinth 2000 couches and furniture.
Composition
- Foot cap assembly sized to fit 1.5 inch square couch leg/frame posts used on Plinth 2000 couches.
- Manufactured as a couch hardware spare part; publicly available sources do not specify the exact material formulation (e.g. specific polymer or composite).
Formulation
- Product type: square foot cap / leg end for 1.5" square frame posts.
- Dimensional compatibility: 1.5 inch square leg or frame post (approx. 38 mm x 38 mm) on Plinth 2000 couches.
- Intended to be fitted to the base of the couch leg to act as the contact point with the floor.
Packaging
- Supplied as a single Plinth 2000 1.5" square foot cap (unit spare part).
- Packed as a small medical furniture accessory for shipment by distributors such as Medisave, Acana Medical and Sterling Medical.
Usage
- Intended for use as a replacement foot cap on compatible Plinth 2000 couches that use 1.5" square leg or frame posts.
- Before installation, ensure the couch is unloaded, stable and cannot move or tip while maintenance is being carried out.
- Remove any remaining damaged or worn foot cap from the base of the 1.5" square leg, taking care around any sharp edges.
- Align the new foot cap with the base of the leg post and press, tap or secure it into place according to the fit of the particular couch design, ensuring it is fully seated and secure.
- After fitting, verify that the couch stands level and that all feet make firm contact with the floor; adjust other feet or use any built-in levelling features as needed.
- Inspect couch feet periodically as part of routine maintenance and replace any that show signs of cracking, excessive wear or looseness.
Contraindications
- Not suitable for couches or furniture that do not use 1.5" square legs or frame posts compatible with this Plinth 2000 foot cap.
- Should not be used if it cannot be securely installed or if the leg/frame post is bent, cracked or otherwise structurally compromised.
- Do not modify or force-fit the foot cap to non-matching leg profiles, as this may result in instability or premature failure.
Adverse Effects
- No direct patient adverse effects are expected when the foot cap is correctly installed; however, a loose or improperly fitted cap could detach, potentially causing chair or couch instability.
- Failure to replace missing or badly worn foot caps may leave exposed metal leg ends that can scratch floors or lead to uneven support, increasing the risk of movement or wobbling.
Storage Conditions
- Store in a clean, dry indoor environment prior to installation.
- Keep in its packaging until required for use to prevent loss of small parts and cosmetic damage.
- Protect from excessive moisture, heat and mechanical damage during storage and transport.
Duration
Not applicable \u2013 this product is a furniture hardware component and remains installed on the couch for ongoing use.
Onset
Not applicable in a clinical sense; stability and floor-protection benefits are realised immediately once the foot cap is correctly fitted.
