Plinth 2000 50 x 25mm Adjustable Foot Cap
Plinth Medical
Medical furniture accessoryAdjustable foot cap for Plinth 2000 examination and treatment couches
Certifications
- Manufactured by Plinth Medical, a UK Based medical furniture manufacturer producing treatment couches and accessories in House and marketing them as UK manufactured with controlled quality and reliability.
- Plinth Medical’s couches and associated products are presented as conforming to applicable UK/EU requirements for medical couches and patient furniture, including CE marking where appropriate and operation under formal quality management systems.
- Distributed by Medisave UK Ltd, a UK medical supplies company registered with the MHRA as a Wholesale Dealer (MHRA WDA licence number 18935) and operating ISO 9001 quality management and ISO 14001 environmental management systems.
- Sold as part of the Plinth Medical couch accessories range through established healthcare suppliers in the UK.
- Manufactured by Plinth Medical, a UK Based medical furniture manufacturer producing treatment couches and accessories in House and marketing them as UK manufactured with controlled quality and reliability.
- Plinth Medical’s couches and associated products are presented as conforming to applicable UK/EU requirements for medical couches and patient furniture, including CE marking where appropriate and operation under formal quality management systems.
- Distributed by Medisave UK Ltd, a UK medical supplies company registered with the MHRA as a Wholesale Dealer (MHRA WDA licence number 18935) and operating ISO 9001 quality management and ISO 14001 environmental management systems.
- Sold as part of the Plinth Medical couch accessories range through established healthcare suppliers in the UK.
Adjustable foot cap for Plinth 2000 examination and treatment couches
Description
The Plinth 2000 50 x 25mm Adjustable Foot Cap is a replacement adjustable foot assembly designed for use with Plinth 2000 couches and compatible Plinth Medical examination and treatment couches that use a 50 x 25 mm rectangular leg/frame section. It is supplied as a couch accessory/spare part and is used to provide an adjustable support foot at the base of the couch frame, helping to level and stabilise the couch on slightly uneven floors and maintain safe, stable positioning in clinical environments.
Bnefits
- Provides an adjustable support foot for Plinth 2000 couches using a 50 x 25 mm frame section
- Enables levelling of the couch on slightly uneven floors to help maintain stability
- Supports safe and comfortable patient positioning by helping keep the couch stable
- Simple replacement spare part that can extend the service life of compatible couches
- Designed specifically for Plinth Medical couches for correct fit and compatibility
Indications
- Replacement of a worn or damaged adjustable foot on a Plinth 2000 couch that uses a 50 x 25 mm frame section
- Levelling and stabilising compatible Plinth Medical couches on slightly uneven flooring
- Routine maintenance of Plinth 2000 couches where one or more adjustable feet need to be renewed
Composition
- Adjustable foot cap assembly designed to fit 50 x 25 mm rectangular couch leg/frame sections on Plinth 2000 couches
- Exact material specification (e.g., plastics/metal types) is not specified in publicly available product information
Formulation
- Product type: Adjustable foot cap / levelling foot assembly
- Compatibility: Plinth 2000 couches and compatible Plinth Medical couches with 50 x 25 mm frame sections
- Function: Provides height-adjustable support at the base of the couch frame to aid levelling and stability
Packaging
- Supplied as a single Plinth 2000 50 x 25mm adjustable foot cap assembly (unit spare part) for couch use
- Packed as a standard Plinth Medical spare/accessory item for shipment by Medisave UK Ltd
Usage
- Intended for use as a couch accessory/spare part on compatible Plinth 2000 couches with 50 x 25 mm frame sections.
- Installation and replacement should be carried out in accordance with Plinth Medical’s couch manuals and service guidance, ideally by a suitably competent person (e.g., facilities/engineering or service technician).
- Before installation, ensure the couch is safely supported, unloaded and cannot move or tip during work.
- Remove the existing foot cap assembly (if fitted) from the appropriate 50 x 25 mm couch frame section as per the couch manual, then fit the new adjustable foot cap in its place.
- Once installed, adjust the threaded/adjustable portion so that all couch feet make firm contact with the floor and the couch is stable and level, checking stability before returning the couch to clinical use.
- Inspect periodically as part of routine couch maintenance and replace if signs of damage, excessive wear or instability are observed.
Contraindications
- Not suitable for use with couches or furniture that are not compatible with Plinth 2000 50 x 25 mm frame sections.
- Should not be used if damaged, deformed or unable to be securely fitted to the couch frame.
- Do not use as a general-purpose adjustable foot for non-approved equipment without confirming compatibility and load capacity with the manufacturer or an appropriate engineer.
Adverse Effects
- No direct patient adverse effects are described for this hardware spare part; however, incorrect installation or adjustment may compromise couch stability, which could increase the risk of couch movement or tipping. Installation and adjustment should therefore follow manufacturer guidance and local service procedures.
Storage Conditions
- No specific storage conditions are stated for this spare part; store in a clean, dry indoor environment.
- Keep in original packaging until required for installation to avoid loss of small parts or accidental damage.
- Protect from excessive moisture, dirt and mechanical damage during storage and transport.
Duration
Not applicable \u2013 this product is a replacement hardware component for Plinth 2000 couches and remains in place for ongoing use once installed and adjusted correctly.
Onset
Not applicable in a clinical pharmacological sense; levelling and stability benefits are realised immediately after the foot cap is correctly installed and the couch has been adjusted on the floor.
Browse more Medical furniture accessory
3 Section Hydraulic Treatment Couch
Medisave
3 Section Hydraulic Treatment Couch
Medical Furniture
- £1,369.19
- -1 more
Anti-Static Castors
Medisave
Anti-Static Castors
Medical Furniture
- £62.39
- -1 more
Arm Table Extensions (pair) for Plinth 2000 Couches
Medisave
Arm Table Extensions (pair) for Plinth 2000 Couches
Medical Furniture
- £220.79
- -1 more
Barham Low Square Coffee Table
Medisave
Barham Low Square Coffee Table
Medical Furniture
- £317.99
- £273.59
- 0 more
Barham Stacking Side Chair
Medisave
Barham Stacking Side Chair
Medical Furniture
- £426.56
- £212.39
- 1 more
Bariatric 2 Section Plinth
Medisave
Bariatric 2 Section Plinth
Medical Furniture
- £2,678.39
- -1 more
Bariatric Ultrasound Couch
Medisave
Bariatric Ultrasound Couch
Medical Furniture
- £4,117.19
- -1 more
Beauty Treatment Couch - Electric (Model PRO3E)
Medisave
Beauty Treatment Couch - Electric (Model PRO3E)
Medical Furniture
- £2,279.99
- -1 more
Brandon Bariatric Armchair
Medisave
Brandon Bariatric Armchair
Medical Furniture
- £485.99
- -1 more
Breathing Hole Plug For All Couches
Medisave
Breathing Hole Plug For All Couches
Medical Furniture
- £44.39
- -1 more
Breathing Slot Option for Plinth 2000 Couches
Medisave
Breathing Slot Option for Plinth 2000 Couches
Medical Furniture
- £56.39
- -1 more
Chrome Lithotomy Stirrups (pair) for Plinth 2000 Couches
Medisave
Chrome Lithotomy Stirrups (pair) for Plinth 2000 Couches
Medical Furniture
- £247.19
- -1 more
