Plinth 2000 End Cap 25mm x 50mm (Standard Polished)

Plinth Medical

Medical furniture accessory

Frame end cap for examination and treatment couches

Manufactured by Plinth Medical as part of the Plinth 2000 couch accessories and spare parts range, which is produced under formal quality systems for medical furniture.
Distributed in the UK by Medisave UK Ltd, an MHRA Registered wholesale dealer operating ISO 9001 quality and ISO 14001 environmental management systems.
Sold as a furniture accessory/spare part rather than a standalone regulated medical device.

Manufactured by Plinth Medical as part of the Plinth 2000 couch accessories and spare parts range, which is produced under formal quality systems for medical furniture.
Distributed in the UK by Medisave UK Ltd, an MHRA Registered wholesale dealer operating ISO 9001 quality and ISO 14001 environmental management systems.
Sold as a furniture accessory/spare part rather than a standalone regulated medical device.

Frame end cap for examination and treatment couches

Description

The Plinth 2000 End Cap 25mm x 50mm (Standard Polished) is a replacement couch accessory designed to fit the 25 mm x 50 mm rectangular frame sections used on Plinth 2000 couches and related Plinth Medical furniture. The polished end cap finishes and protects the open ends of the metal couch frame, helping to prevent sharp edges, improve appearance and reduce the risk of dirt or fluids entering the frame tube.

Bnefits

Provides a neat, polished finish to exposed 25 x 50 mm frame tube ends on Plinth 2000 couches.
Helps protect patients, staff and surroundings from sharp or rough frame edges.
Reduces the likelihood of dirt, dust or fluids entering the open tube section.
Simple replacement spare part that can extend the service life and appearance of compatible couches.
Designed specifically for Plinth 2000 frame profiles to ensure correct fit and compatibility.

Indications

Replacement of missing or damaged end caps on Plinth 2000 couches or accessories using 25 mm x 50 mm rectangular frame sections.
Restoration of a smooth, finished end to metal frame tubes on compatible Plinth Medical couches.
Routine maintenance and refurbishment of examination and treatment couches in clinical settings.

Composition

Polished end cap component designed to fit 25 mm x 50 mm rectangular metal tube sections on Plinth 2000 couches.
Manufactured as a couch hardware spare part; exact material specification (e.g. specific metal or polymer grade) is not stated in publicly available product information.

Formulation

Product type: couch frame end cap / finishing cap.
Dimensional compatibility: 25 mm x 50 mm rectangular tube used on Plinth 2000 couches.
Finish: standard polished finish as described by the manufacturer and distributors.

Packaging

Supplied as a single Plinth 2000 25 mm x 50 mm standard polished end cap (unit spare part).
Packed as a small couch accessory item for shipment by Medisave UK and other distributors.

Usage

Intended for use as a replacement end cap on compatible Plinth 2000 couch frame sections sized 25 mm x 50 mm.
Before fitting, ensure the couch is stable, unloaded and positioned safely for maintenance.
Remove any remaining damaged or worn end cap from the frame end, taking care to avoid sharp edges.
Align the new end cap with the open end of the 25 x 50 mm frame tube and press or tap into place as appropriate for the specific frame design, ensuring a secure, flush fit.
After installation, check that the end cap is firmly seated and that there are no protruding edges that could cause injury or snagging.
Inspect end caps periodically as part of routine couch maintenance and replace any that are cracked, loose or missing.

Contraindications

Not suitable for couches or furniture that do not use 25 mm x 50 mm frame sections compatible with this Plinth 2000 end cap.
Should not be used if it cannot be securely fitted to the frame or if the frame itself is bent, cracked or otherwise damaged.
Do not modify or force-fit the end cap to non-matching frame profiles, as this may compromise safety or durability.

Adverse Effects

No direct patient adverse effects are expected when the product is correctly installed; however, an incorrectly fitted or loose end cap could detach and create a trip or snagging hazard.
Failure to replace missing or damaged end caps may leave sharp or rough metal edges exposed, increasing the risk of minor cuts or damage to flooring and furnishings.

Storage Conditions

Store in a clean, dry indoor environment prior to installation.
Keep in its packaging until required to prevent loss or cosmetic damage.
Protect from excessive moisture, corrosive substances and mechanical damage during storage and transport.