Accessory for Welch Allyn blood pressure systems manufactured under medical device quality management standards (e.g., ISO 13485) as part of the Welch Allyn/Hillrom device portfolio.
Intended for use with CE Marked and/or FDA Cleared non Invasive blood pressure devices where applicable, following local regulatory requirements.
Accessory for Welch Allyn blood pressure systems manufactured under medical device quality management standards (e.g., ISO 13485) as part of the Welch Allyn/Hillrom device portfolio.
Intended for use with CE Marked and/or FDA Cleared non Invasive blood pressure devices where applicable, following local regulatory requirements.
The BP FlexiPort Fitting, 2-Tube - Pack of 10 is a set of original Welch Allyn FlexiPort blood pressure (BP) port fittings designed to connect two-tube BP devices and tubing to Welch Allyn FlexiPort blood pressure cuffs. Each PORT-2 fitting provides a standardized two-tube FlexiPort interface, enabling quick connection and disconnection of cuffs without repeatedly attaching and detaching tubing from the monitor. Supplied as a non-sterile accessory, these compact plastic fittings are used in hospitals, clinics and primary care settings to support routine non-invasive blood pressure measurement while simplifying cuff standardization across multiple devices.
Bnefits
Provides a standardized two-tube FlexiPort connection for compatible Welch Allyn blood pressure cuffs and monitors.
Enables quick, snap-in connection and disconnection of cuffs, improving workflow efficiency and reducing setup time between patients.
Supports cuff standardization across multiple devices, allowing one FlexiPort-enabled cuff family to work with many monitors.
Pack of 10 fittings offers convenient stocking and replacement for busy clinical environments.
Compact, lightweight fittings add minimal bulk to tubing and are easy to handle during routine BP measurement.
Manufacturer-original accessory helps maintain system compatibility and consistent performance compared with generic connectors.
Indications
Use as an accessory fitting to connect compatible Welch Allyn FlexiPort blood pressure cuffs to two-tube non-invasive blood pressure (NIBP) devices.
Intended for non-invasive blood pressure measurement in clinical settings such as hospitals, GP surgeries, outpatient clinics and emergency departments.
Suitable for use with Welch Allyn devices and other monitors that are compatible with Welch Allyn FlexiPort 2-tube fittings when configured according to manufacturer guidance.
Composition
Non-sterile molded plastic body designed as a two-tube FlexiPort fitting.
Internal connector geometry engineered to mate with Welch Allyn FlexiPort cuff ports and twin-lumen BP tubing.
Formulation
Non-invasive medical device accessory; no medicinal, biological or pharmacological components.
Two-tube (dual-lumen) FlexiPort fitting designed for use with compatible BP cuffs and tubing systems.
Reusable accessory intended for repeated connection/disconnection when cleaned and inspected according to local protocols.
Packaging
Retail pack containing 10 x Welch Allyn BP FlexiPort Fitting, 2-Tube (PORT-2) connectors.
Supplied as non-sterile accessories in manufacturer or distributor packaging labelled with product name, brand, quantity and part number PORT-2.
Individual fittings are loose or bagged within the outer pack depending on distributor packing configuration.
Usage
Intended for use by trained healthcare professionals familiar with non-invasive blood pressure equipment.
Identify the FlexiPort connection on the Welch Allyn blood pressure cuff and align the 2-tube FlexiPort fitting (PORT-2) with the cuff’s FlexiPort receptacle.
Press the fitting firmly into the FlexiPort cuff port until it snaps securely into place, confirming that both tubes are fully engaged.
Connect the opposite ends of the two tubes to the compatible BP device tubing or ports as specified by the monitor manufacturer or local configuration.
Before use on a patient, verify that the system inflates and deflates properly and that there are no air leaks at any connection point.
Use the fitting only for non-invasive blood pressure measurement; do not use for any invasive or sterile applications.
Clean and disinfect the fittings between patients according to local infection-control policies and the manufacturer’s recommendations for FlexiPort cuffs and accessories.
Inspect fittings routinely for cracks, deformation, discoloration, loose connections or reduced retention; discard and replace any fitting that shows signs of wear or damage.
Contraindications
Not for invasive use or for connection to intra-arterial or other invasive pressure monitoring systems.
Do not use if the fitting is cracked, deformed or fails to lock securely into the FlexiPort cuff, as this may cause air leaks and inaccurate blood pressure readings.
Do not use with non-compatible devices or cuffs that are not designed for Welch Allyn FlexiPort connections.
Not intended for sterile procedures; do not use where sterile, single-use accessories are required.
Adverse Effects
No direct patient adverse effects are expected when used as a non-invasive connector.
Incorrect or loose connections may lead to inaccurate or failed blood pressure measurements, which could indirectly impact clinical decision-making if not recognised.
Overtightened or poorly routed tubing associated with the fitting may cause transient discomfort or skin indentation at the cuff site.
Storage Conditions
Store in a clean, dry location at normal room temperature away from excessive heat, moisture and direct sunlight.
Keep fittings in their packaging or an appropriate storage container when not in use to protect from dust and mechanical damage.
Avoid exposure to harsh chemicals or solvents that could degrade the plastic material.
Keep out of the reach of children and non-clinical personnel.
Duration
Not applicable \u2013 this product is a reusable accessory used only during the period of each non-invasive blood pressure measurement.
Onset
Not applicable \u2013 mechanical connector with no pharmacological or physiological effect.
