Printer Paper for Welch Allyn Vital Signs Monitor Series 300 Box of 6 Rolls

Welch Allyn

Medical Equipment Consumable

Vital Signs Monitor Printer Paper

OEM accessory specified by Welch Allyn for the Vital Signs Monitor 300 Series as printer paper part number 7052 25.
Listed in Welch Allyn Vital Signs Monitor 300 Series accessory documentation and product catalogues as “Printer Paper (box of 6 rolls)”.

OEM accessory specified by Welch Allyn for the Vital Signs Monitor 300 Series as printer paper part number 7052 25.
Listed in Welch Allyn Vital Signs Monitor 300 Series accessory documentation and product catalogues as “Printer Paper (box of 6 rolls)”.

Vital Signs Monitor Printer Paper

Description

Printer Paper for Welch Allyn Vital Signs Monitor Series 300 (part number 7052-25) is a box of six rolls of OEM thermal printer paper designed specifically for use with Welch Allyn Vital Signs Monitor 300 Series devices. The rolls provide reliable, high-contrast printing of patient vital signs such as blood pressure, pulse and other parameters, and are recommended in the VSM 300 operator’s manual as the only approved paper for optimal printer performance. Each roll is sized for the integrated thermal printer in the monitor, ensuring correct fit, paper tracking and print quality during routine clinical use.

Bnefits

Genuine Welch Allyn OEM thermal printer paper approved for Vital Signs Monitor 300 Series devices.
Ensures optimal print quality and legibility of patient vital signs records.
Correctly sized rolls for the integrated VSM 300 thermal printer, ensuring proper fit and paper tracking.
Reduces risk of printer jams, poor print density or premature print-head wear compared with non-approved papers.
Supplied as a cost-effective box of six rolls to support regular clinical use.
Explicitly recommended in the VSM 300 operator’s manual as the only paper to use for best performance.

Indications

Printing patient vital signs data from Welch Allyn Vital Signs Monitor 300 Series devices equipped with an integrated thermal printer.
Use in hospitals, clinics, GP surgeries and other healthcare settings where hard-copy vital signs records are required for documentation or review.
Replacement paper supply for compatible Welch Allyn vital signs monitors and configurations that specify part number 7052-25.

Composition

Thermal printer paper rolls designed for medical device printers.
Paper width: approximately 7.3 cm.
Paper length per roll: approximately 13.1 m (nominal, based on product specifications from distributors).
Outer diameter and core sized to suit the integrated printer mechanism in the VSM 300 Series monitor.

Formulation

Non-sterile, single-ply thermal recording paper.
Roll format for installation in the rear-mounted thermal printer of Welch Allyn Vital Signs Monitor 300 Series.
Compatible only with devices and printers specified by Welch Allyn for part number 7052-25.
Not intended for use with non-thermal printers or non-compatible monitoring systems.

Packaging

Box of 6 thermal printer paper rolls.
Each roll individually wound on a core suitable for the VSM 300 printer compartment.
Supplied in branded or labelled packaging identifying part number 7052-25 and intended device compatibility.

Usage

Ensure the Welch Allyn Vital Signs Monitor 300 Series device is powered on or in a safe state as described in the operator’s manual before opening the printer compartment.
Press the printer door release button or latch to open the printer door on the rear of the monitor.
Remove any remaining paper core or used roll from the printer compartment.
Insert a new 7052-25 paper roll into the compartment, ensuring the paper feeds from the correct side of the roll as shown in the device instructions.
Thread the loose end of the paper over the roller and through the slot in the printer door, leaving a small length protruding.
With one hand, gently pull the paper to remove slack while closing the printer door firmly with the other hand until it clicks into place.
Verify that the paper path is unobstructed and that the paper is not caught in the printer door.
Perform a test print or initiate a printout of vital signs data to confirm proper feeding and print quality.
Replace the roll whenever the paper low or paper out indication appears or printing ceases due to an empty roll.
Use only Welch Allyn 7052-25 thermal paper (or an equivalent approved by Welch Allyn) to avoid poor print performance or potential printer damage.

Contraindications

Not intended for use with non-thermal printers or devices other than compatible Welch Allyn vital signs monitors.
Do not use if rolls are crushed, heavily creased, water-damaged or contaminated, as this may cause printer malfunction or poor print quality.
Not suitable for direct clinical use on patients (e.g. not to be used as a dressing, label on skin or internal product).

Adverse Effects

No direct patient adverse effects are expected when used as intended, as this is a non-patient-contact consumable.
Use of incompatible or damaged paper may result in illegible printouts, incomplete records or printer jams, which can delay documentation of vital signs.
Excessive dust or paper debris from damaged rolls could contribute to printer contamination over time if not maintained properly.

Storage Conditions

Store in a cool, dry environment away from direct sunlight and sources of heat.
Avoid high humidity and moisture, which can degrade thermal coating performance and cause paper curling or sticking.
Keep rolls in their original packaging until required to protect them from dust, dirt and physical damage.
Do not stack heavy objects on top of the paper box to prevent deformation of rolls.
Follow any additional storage guidance provided on the product packaging or by Welch Allyn.

Duration

Not applicable \u2013 this is a consumable recording medium used as needed for printing vital signs data; each roll lasts until the paper is exhausted.